Hertfordshire · England

Shower tray repair & resurfacing in Chenies, Hertfordshire

Local shower tray repair for Chenies: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips caused during fitting
  • A tray that looks tired however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Chenies homes

Materials and what they mean for the repair

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

Shower tray repair at your home in Chenies

We check the tray before repairing it: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We’ll explain what we find. Typical jobs include chips caused during fitting and a damaged area around the waste, across ceramic, stone resin and acrylic.

Every repair is covered by a one-year guarantee.

Before and after: an old shower tray refinished by Surface Doctor
Where
Chenies (WD3)
Region
Hertfordshire
Cover
A year, on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Honest limits

It helps to know what we cannot do:

  • Water damage to the floor beneath the tray
  • Leaking waste fittings
  • Multiple cracks across the tray

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Enamelled steel
  • Acrylic
  • Ceramic
  • Cast iron
  • Stone resin

Repair or replace: which is better?

If the tray is solid and the crack hasn’t let water spread, repair is generally best. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Chenies. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Chenies customers choose us

  • We come to you, anywhere in the UK
  • One price list for the entire UK
  • One-year guarantee on every repair
  • A fixed quote before you book

Read our pricing.

Chenies and the surrounding area

Chenies is about 3 miles east of Amersham, in Hertfordshire. We travel to homes and businesses in Chenies and nearby villages, so there’s no workshop to go to. Chenies is one of 381 places in Hertfordshire we cover. Our jobs stretch from Chenies to London (about 22 miles away).

Jobs in WD3 work the same way as everywhere else we cover. Neighbouring places we cover include Latimer (1 mile west), Flaunden (1 mile north), Little Chalfont (2 miles west), Belsize (2 miles north-east) and Chorleywood (2 miles south-east). Within a short drive, we also cover Watford (6 miles east), Hemel Hempstead (6 miles north-east), St Albans (10 miles north-east), Harpenden (12 miles north-east), Hatfield (14 miles north-east) and Borehamwood (11 miles east).

Near you in Chenies

Around Chenies, we work in homes near The Bedford Arms, St Clement Danes School and Church of St Michael. Chenies’s nearest station is Chalfont & Latimer station, roughly 1.4 miles south-west of the centre. A little further out are Amersham Fair Organ Museum (2.8 miles west) and Amersham Hospital (4 miles west). For a walk, there is Sarratt Bottom nature reserve and Tumbling Bay.

Map of Chenies © OpenStreetMap contributors

The process

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, or most of the day to resurface the whole tray, and we leave the room as we found it.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat

Get a quote

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a free quote

Related advice

What we’re called out for in Chenies

Stone resin trays are rigid, so they crack rather than bend if the floor beneath them isn’t flat and fully supported. Timber floors that move can cause it too.

The most common problems we’re called about are:

  • Scratches from cleaning or grit
  • A tray that looks tired however much you clean it
  • Chipped corners or rims
  • Damage around the waste

What your quote should include

  • Whether there are any call-out or travel charges
  • What prep work is covered
  • How changes to the job are handled
  • What protection goes down before work starts

How to compare quotes

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Looking after it afterwards

So the finish stays in good condition:

  • Clean with washing-up liquid and a soft cloth
  • Ventilate the room after showers
  • Check the seal every few months
  • Don’t ignore a tray that flexes

Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.

Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Chenies questions

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

What happens next?

We check the damage, the material and your postcode, then reply with a quote with dates.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

How long does it take to cure?

Normally by the following day. We’ll confirm before we leave.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can you replace the silicone at the same time?

We can. It’s a good time to replace old sealant.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.