Kent · England
Shower tray repair & resurfacing in Clapper Hill, Kent
Shower tray repair across Clapper Hill and nearby, done in a single visit in most cases.
- Repairs from £95
- Movement when you stand on it
- A cracked shower tray
Shower tray repair in Clapper Hill without replacing anything
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. Typical jobs include a tray that looks tired however much you clean it and a tray that creaks or moves underfoot, in cast iron, stone resin and ceramic.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Clapper Hill (TN27)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Clapper Hill questions
Do you cover Clapper Hill?
We do. We send a technician to Clapper Hill for every job, and the price is the same as everywhere else.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for shower tray repair in Clapper Hill?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
When can I use the shower again?
Normally by the following day. We’ll confirm before we leave.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you replace the silicone at the same time?
Yes. We can repair and reseal on the same visit.
Is it OK to use a cracked tray?
It’s best to stop using it until it’s checked, because water may be getting underneath.
Places near Clapper Hill
Also in Clapper Hill
Repairing versus replacing in Clapper Hill
Replacing a tray generally means refitting the screen, retiling and resealing. Repairing it avoids all of that, at a fraction of the cost. Our shower tray repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Clapper Hill clients choose us
- Dust sheets down, tidy finish
- No extra charge for your area
- Free fixed quotes from pictures
- Straight answers about what a repair can do
Read our prices page.
What we can’t put right
It helps to know what we cannot do:
- Movement caused by a poor base, until the support is fixed
- Damage below the tray that needs a builder
- A tray broken in more than one place
Send us photos and we’ll tell you honestly.
Materials we work on in Clapper Hill
- Stone resin
- Ceramic
- Acrylic
- Enamelled steel
- Cast iron
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we price shower tray repair
Repairs from £95. We price every job individually. The main factors are:
- Where the damage is and how we get to it
- How many items we do on one visit
- Unusual colours or finishes
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Send us a photo of the damage and a wider shot of the whole item, with your TN27 postcode, and we’ll come back with a fixed quote.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repairs by material
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Signs you need shower tray repair in Clapper Hill
Trays crack mainly because they move: if a tray wasn’t bedded on a solid, even base, every shower puts strain on it. Chips usually come from dropped bottles.
If you can see any of these, send us a photo:
- Cracks running from the waste
- Movement when you stand on it
- Scuffs and light scratches
- Damage from a refit or building work
What to look for in a quote
- Whether the price covers travel
- Whether they match the colour on site
- Who will actually do the work
- Whether cleaning and preparation are in the price
What happens on the day
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, or most of a day for a full resurface, and the room is left clean and tidy.
- The surrounding area is sheeted and masked.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
How to prepare
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Get a quote
To get a price, send two or three pictures using our quote form or ring us. We’ll say right away whether it can be repaired.
Related advice
Covering Clapper Hill
Clapper Hill is about 10 miles west of Ashford, in Kent. Wherever you are in the TN27 postcode area, a technician comes to you. Our technicians cover 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 42 miles away.
Every address in TN27 is within our area, from the main roads to the quietest streets. We also cover the places around Clapper Hill: Fosten Green (1 mile west), East End (1 mile south-west), Parkgate (1 mile south-east), London Beach (2 miles east) and Strood (3 miles south). Larger places within reach include Maidstone (13 miles north), Ashford (10 miles east), Foley Park (14 miles north), Paddock Wood (12 miles north-west), Tenterden (3 miles south-east) and Bearsted (12 miles north).
Local landmarks in Clapper Hill
Around Clapper Hill, we work in homes near Wattle Wood, among other places. For rail, the closest station is Headcorn station, about 4.8 miles north. A little further out are Mervyn Quinlan Museum (1.2 miles south-west) and Sissinghurst Castle (2.8 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
