North Yorkshire · England

Shower Tray Repair for Cliffe Common homes

Problem with your shower tray in Cliffe Common? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • A damaged area around the waste
  • Scratches from cleaning or grit
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Cliffe Common

When we would advise against a repair

We will always be straight with you, so here’s what a repair won’t do:

  • Trays cracked in several places
  • Water damage to the floor beneath the tray
  • Leaking waste fittings

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Stone resin
  • Acrylic
  • Enamelled steel
  • Ceramic
  • Cast iron

About our shower tray repair in Cliffe Common

Every crack has a cause, and we find it first. If the tray moves, the support is fixed or flagged before we repair it, so the repair lasts. We work on acrylic, cast iron and enamelled steel, and common reasons people get in touch are movement when you stand on it and damage from a refit or building work.

A one-year guarantee comes as standard, so you’re not left on your own once we have gone.

Before and after: an old shower tray refinished by Surface Doctor
Area
Cliffe Common (YO8)
Region
North Yorkshire
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

Replacing a tray normally involves taking out the enclosure and tiles, preparing a new base and tiling again. A repair or resurface leaves all of that alone. Our shower tray repair starts from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why us?

  • Work done at your home or business
  • CHAS, Constructionline and SafeContractor accredited
  • Rooms protected and left tidy
  • Usually one visit, start to finish

Read our prices page.

Cliffe Common and the surrounding area

Cliffe Common is about 3 miles east of Selby, in North Yorkshire. Across the YO8 area, a technician comes to you. Cliffe Common is one of 626 places in North Yorkshire where we work. You can also see our page for Leeds, about 23 miles away.

Our visits in YO8 work the same way as everywhere else we cover. Neighbouring places we cover include South Duffield (1 mile south-east), Cliffe (1 mile south), Hemingbrough (2 miles south), Woodhall (2 miles south-east) and Breighton (3 miles east). Within a short drive, we also cover Selby (3 miles west), Tadcaster (13 miles north-west), Brayton (5 miles south-west), Thorpe Willoughby (6 miles west), Hambleton (7 miles west) and Cawood (6 miles north-west).

Near you in Cliffe Common

Typical jobs here are in homes near Barlby High School and the streets around them. The closest station to Cliffe Common is Selby station, roughly 3.1 miles west of the centre. A little further out are Menthorpe cum Bowthorpe (1.7 miles east) and Duffield Castle (2.7 miles north-east). Green spaces nearby include Skipwith Common.

Map of Cliffe Common © OpenStreetMap contributors

What we’re called out for in Cliffe Common

Cracks often start at the waste, where the tray is cut and the fitting is tightened.

The most common problems we’re called about are:

  • A tray that creaks or moves underfoot
  • Damage around the waste
  • Damage from a refit or building work
  • Staining and dullness across the tray

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • When it can be used again
  • Whether they match the colour on site

10 questions to ask before you book

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

For anyone letting property in or around Cliffe Common, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

How the visit works

Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours, or most of the day to resurface the whole tray. Before leaving, we tell you when it can be used and how to look after it.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Mention if the room is upstairs or in a flat

Getting a price

To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Send photos for a quote

Read more

What shower tray repair costs

Prices start from £95. Each job gets its own fixed price. This is what makes a difference:

  • The material and finish
  • How many items we do on one visit
  • How hard the colour is to match
  • How much damage there is

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

How to get a fixed price

Most quotes are done from pictures alone. To help us price it:

  • A clear, close picture of the problem area
  • A wider photo showing the whole shower tray
  • The material, if you know it
  • Daylight if possible, and no flash reflection

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

Cliffe Common: your questions answered

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.

Can you fix a cracked tray?

Typically, as long as it does not flex. The crack is reinforced, filled and refinished.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

When can I use the shower again?

We’ll give you the curing time on the day, typically the following day.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

Can you replace the silicone at the same time?

We can. After a repair is a good time to reseal.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Keep harsh chemicals off the tray
  • Ventilate the room after showers
  • Rinse away soap after showering
  • Report any creaking or movement early

Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.

If the tray creaks or moves, get it checked, before it cracks.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.