Cornwall · England

Shower tray repair & resurfacing in Connor Downs, Cornwall

We travel to Connor Downs for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Cracks running from the waste
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Connor Downs?

How we handle shower tray repair in Connor Downs

The first thing we do is check the tray: if it flexes underfoot, the cause needs sorting before any repair, otherwise any crack returns. We’ll explain what we find. We’re often asked to fix snagging damage in a new bathroom and staining and dullness across the tray, in acrylic, ceramic and stone resin.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.

Before and after: an old shower tray refinished by Surface Doctor
Where
Connor Downs (TR27)
County
Cornwall
Warranty
12 months on all our work
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Aftercare tips

Aftercare is simple:

  • Give the tray a quick rinse after use
  • Stick to gentle cleaners
  • Ventilate the room after showers
  • Don’t stand heavy bottles on the tray

Check the silicone around the tray every few months, and reseal when it starts to fail.

Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.

When a repair is not the answer

A repair isn’t right for every job, including:

  • A tray that flexes because it was never properly supported
  • A tray broken in more than one place
  • Damage below the tray that needs a builder

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Ceramic
  • Enamelled steel
  • Acrylic
  • Stone resin
  • Cast iron

Connor Downs and the surrounding area

Connor Downs is about 3 miles west of Camborne, in Cornwall. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 644 places across Cornwall, from the larger towns to small villages.

We cover every part of TR27 and the streets around it. Streets in the area include Willoughby Way, Coronation Avenue and Tresdale Parc. Neighbouring places we cover include Roseworthy (1 mile east), Upton Towans (1 mile west), Gwithian (1 mile north-west), Kehelland (2 miles north-east) and Penponds (2 miles east). Larger places within reach include Truro (14 miles east), Falmouth (13 miles east), Camborne (3 miles east), Redruth (7 miles east), Penzance (10 miles south-west) and Helston (8 miles south-east).

Local landmarks in Connor Downs

Around Connor Downs, we work in homes near Hayle Recreation Ground, Connor Downs Academy and Hayle Academy, among other places. Other local landmarks include The Turnpike Inn (less than half a mile west) and Church of Saint Winnear (1.2 miles south). For rail, the closest station is Hayle station, roughly 2.7 miles south-west. Other landmarks nearby include St Michael's Hospital (3 miles south-west) and Hayle Heritage Centre (2.8 miles south-west). Green spaces nearby include Godolphin Hill.

Map of Connor Downs © OpenStreetMap contributors

Landlord and trade work in Connor Downs

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours, or most of a day for a full resurface. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. We refinish the surface to match the tray.
  5. We tidy up and tell you when you can shower.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Have somewhere for us to park nearby if possible
  • Ensure the area is dry

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.

Send photos for a quote

Advice

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.

Prices and what affects them

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • The type of damage
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • What the surface is made of

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed price

Good photos mean an accurate price. Here’s what helps:

  • Any earlier repairs or coatings
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Common problems we fix in Connor Downs

The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.

The most common problems we are called about are:

  • Damage from a refit or building work
  • Scratches from cleaning or grit
  • Chipped corners or rims
  • Chips or cracks by the plughole

Before booking anyone

  • Is the price fixed, and does it include VAT?
  • What prep work is covered
  • What protection goes down before work starts
  • What happens if they find more damage

How to compare quotes

FAQs for Connor Downs

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Connor Downs.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Can you make an old tray look new?

Yes. We can resurface the whole tray for a fresh finish.

Do you work in Connor Downs?

Yes. We cover the whole UK and travel to Connor Downs and the rest of Cornwall. Send photos and we’ll quote, or call 0345 017 0787.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.