Staffordshire · England
Shower tray repair & resurfacing in Coton, Staffordshire
Shower tray repair in Coton without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- A tray that looks tired however much you clean it
- Chips caused during fitting
Coton and nearby
Coton is about 5 miles east of Stone, in Staffordshire. Across the ST18 area, we come to you. We cover 512 places across Staffordshire. You can also see our page for Birmingham, about 29 miles away.
Every address in ST18 is within our area, from the main roads to the quietest streets. You will find streets such as Uttoxeter Road and Wallbrook Road. If you are just outside Coton, we cover Coton Hayes (1 mile north-east), Milwich (1 mile west), Fradswell (1 mile south-east), Dayhills (2 miles west) and Smallrice (2 miles west). We also work in nearby towns such as Stafford (7 miles south-west), Newcastle-under-Lyme (13 miles north-west), Cannock (13 miles south), Longton (8 miles north-west), Rugeley (10 miles south) and Burntwood (15 miles south).
Landmarks near Coton
We visit homes around Green Lea First School, The Green Man pub and Church of All Saints. Nearby you will also find Chartley Castle (2.9 miles south-east).
Shower tray repair at your home in Coton
Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. Nothing is taken out, so the enclosure and tiles are not disturbed. Whether it’s damage around the waste and movement when you stand on it, we can help, on ceramic, enamelled steel and acrylic alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Coton (ST18)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Coton
When we would advise against a repair
It helps to know what we cannot do too:
- A tray that moves underfoot
- A tray broken in more than one place
- Leaks from the waste or pipework (a plumber’s job)
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron
- Acrylic
- Ceramic
- Stone resin
- Enamelled steel
Keeping it looking good
So the finish stays in good condition:
- Avoid strong descalers and bleach
- Stick to gentle cleaners
- Rinse the tray after each shower
- Ventilate the room after showers
Keep heavy bottles off the tray floor, so they cannot be knocked over.
Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.
Signs you need shower tray repair in Coton
Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.
Typical reasons for a call-out include:
- A damaged area around the waste
- Edge chips from dropped bottles
- A dull, stained or worn surface
- Snagging damage in a new bathroom
Comparing quotes
- Who will actually do the work
- How to care for the finish
- What happens if they find more damage
- The length of the guarantee and what it covers
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Where the damage is and how we get to it
- What kind of damage it is
- The size and number of damaged areas
- The material and finish
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from photos
Two or three clear pictures are usually enough. Try to include:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Work for landlords and builders
For anyone letting property in or around Coton, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Coton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Questions from Coton
What does shower tray repair cost?
Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your ST18 postcode.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you cover Coton?
Yes, we do. Technicians travel to Coton from across the region, and the price is the same as everywhere else.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Should you replace it?
Replacing a tray typically means taking out the enclosure and tiles, preparing a new base and tiling again. A repair or resurface leaves all of that alone. Our shower tray repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Coton customers choose us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Most jobs done in one visit
- We leave the room as we found it
Take a look at our prices page.
The process
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes a few hours, or most of a day for a full resurface, and you’re welcome to carry on with your day while we work.
- The surrounding area is sheeted and masked.
- Any sealant in the way is cut out.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We clean up and give you the curing time.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
How to get a price
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
