North Tyneside · England
Shower tray repair & resurfacing in Cullercoats, North Tyneside
Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Cullercoats. Send pictures for a free, fixed quote.
- Repairs from £95
- A tray that creaks or moves underfoot
- Chips caused during fitting
Shower tray repair at your home in Cullercoats
Every crack has a cause, and we find it first. If the tray moves, the support is fixed or flagged before we repair it, so the crack does not come back. Typical jobs include staining and dullness across the tray and chipped corners or rims, across stone resin, ceramic and acrylic.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Cullercoats (NE30, NE26, NE25)
- Area hub
- North Tyneside
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Cullercoats and nearby
Cullercoats is about 1 mile north-east of Tynemouth, in North Tyneside. We visit homes and businesses in Cullercoats, so you don’t need to take anything anywhere. Cullercoats is one of 30 places in North Tyneside where we work. Our jobs stretch from Cullercoats to Newcastle upon Tyne (9 miles away).
All of NE30, NE26 and NE25 is covered. Streets in the area include Shap Road, Dene Road and Mast Lane, all of which we cover. With the A191 close by, Cullercoats is simple for us to get to. Close by, we cover Whitley Bay (1 mile north-west), Tynemouth (1 mile south-west), North Shields (2 miles south), Preston (2 miles south) and Murton (2 miles west). Larger places within reach include Wallsend (4 miles south-west), Longbenton (5 miles west), Killingworth (5 miles west), Seaton Delaval (4 miles north-west), Howdon (3 miles south-west) and Shiremoor (3 miles west). Cullercoats is among the bigger towns we cover in North Tyneside.
What’s near Cullercoats
Around Cullercoats, we work in homes near St George's Cullercoats, Marden High School and Queens Head pub. The closest station to Cullercoats is Northumberland Park (Tyne and Wear) station, roughly 3.4 miles west of the centre. Other landmarks nearby include Silverlink Shopping Park (2.8 miles south-west) and Municipal Borough of Whitley Bay (1.3 miles north-west).
What your shower tray is made of matters
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and we match repairs to the surface finish.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Damage below the tray that needs a builder
- Movement caused by a poor base, until the support is fixed
- Multiple cracks across the tray
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Cullercoats
- Stone resin
- Acrylic
- Cast iron
- Ceramic
- Enamelled steel
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common problems we fix in Cullercoats
Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On concrete, an uneven base is the usual cause.
Look out for these signs:
- Cracks running from the waste
- Damage around the waste
- Chipped corners or rims
- Snagging damage in a new bathroom
What to look for in a quote
- What happens if they find more damage
- How the room is protected while they work
- If travel is included in the price
- Whether they match the colour on site
What shower tray repair costs
Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:
- How hard the colour is to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- Access to the area
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- The material, if you know it
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
A quote takes minutes to ask for: photograph the damage, then the whole shower tray, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Places near Cullercoats
More services for Cullercoats
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
It’s all simple stuff:
- Do not ignore a tray that flexes
- Replace failing sealant promptly
- Rinse away soap after showering
- Avoid strong descalers and bleach
Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.
Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours for a repair, longer for a full resurface, including clearing up.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We colour-match the repair, or spray a new finish across the entire tray.
- We leave it to cure; the shower is generally usable the next day.
How to prepare
- Open a window if you can
- Clear the area around the damage
- Tell us if there are stairs or a lift
Get a quote
Upload photos of the damage and one of the entire item, with your NE30 postcode, and we will reply with a fixed quote.
Advice
Common questions in Cullercoats
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we will quote them together.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is a cracked tray repairable?
Typically, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.
Do you work in Cullercoats?
Yes, we do. We send a technician to Cullercoats for every job, with no extra charge for travel.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a cracked shower tray safe to use?
Only if you’re sure it is not leaking. Check the ceiling below for damp.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
About our accreditations · Every repair comes with a one-year guarantee.
