Neath Port Talbot · Wales
Shower Tray Repair in Cymer and Glyncorrwg
Shower tray repair in Cymer and Glyncorrwg without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Scratches from cleaning or grit
- A cracked shower tray
Shower tray repair in Cymer and Glyncorrwg without replacing anything
The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We will tell you if that’s the case. Whether it’s damage around the waste and scratches from cleaning or grit, we can usually put it right, whatever the material.
Every job is backed for twelve months in Cymer and Glyncorrwg and everywhere else. We return to put right any problem with the work.
- Where
- Cymer and Glyncorrwg (SA13)
- Region
- Neath Port Talbot
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Trays sit under the screen and tiles, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Our shower tray repair starts from £95. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Cymer and Glyncorrwg clients choose us
- We come to you, anywhere in the UK
- Colour-matched on site
- One-year guarantee on every repair
- Honest advice, even when it means no job
Take a look at our pricing.
Landlords, agents and businesses in Cymer and Glyncorrwg
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Where we work around Cymer and Glyncorrwg
Cymer and Glyncorrwg is about 4 miles north of Maesteg, in Neath Port Talbot. Clients in Cymer and Glyncorrwg get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Cymer and Glyncorrwg is one of 100 towns and villages in Neath Port Talbot where we work.
We work across the SA13 postcode area and the streets around it. If you’re just outside Cymer and Glyncorrwg, we cover Cymmer (1 mile south), Glyncorrwg (1 mile north-east), Abercregan (1 mile south-west), Croeserw (2 miles south) and Blaengwynfi (2 miles east). Within a short drive, we also cover Neath (7 miles west), Port Talbot (8 miles south-west), Sandfields (9 miles south-west), Mount Pleasant (7 miles west), Baglan Moors (8 miles south-west) and Sandfields West (9 miles south-west).
Near you in Cymer and Glyncorrwg
Typical jobs here are in homes near St John The Baptist's Church and Glyncorrwg Primary School, among other places. Cymer and Glyncorrwg’s nearest station is Maesteg station, about 4 miles south of the centre. Other landmarks nearby include Maesteg Community Hospital (4.1 miles south) and Llwdarth (4.7 miles south). Green spaces nearby include Cefnmawr and Llyn Fach.
Cymer and Glyncorrwg questions
Is a cracked tray repairable?
Frequently. If the tray moves, the support needs fixing first.
Do you reseal the tray as well?
Yes. We can repair and reseal on the same visit.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Neath Port Talbot.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before and we’ll plan for it.
What areas do you cover?
Everywhere in the UK, Cymer and Glyncorrwg included. There is no extra charge for travel.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Check the seal every few months
- Do not ignore a tray that flexes
- Keep harsh chemicals off the tray
- Rinse the tray after each shower
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Do you need shower tray repair in Cymer and Glyncorrwg?
Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks typically point to an uneven base.
The most common problems we are called about are:
- A dull, stained or worn surface
- Damage from a refit or building work
- A cracked shower tray
- A tray that flexes
Questions to ask before you book
- How changes to the job are handled
- What preparation is included
- How your room will be protected
- Aftercare advice
Honest limits
We will not take on work that will not last, so these are the limits:
- Trays cracked in several places
- A tray that flexes because it was never properly supported
- Damage below the tray that needs a builder
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Cast iron
- Ceramic
- Enamelled steel
- Stone resin
What we do, step by step
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow a few hours for a repair, longer for a full resurface.
- We check the tray is firmly supported and find the cause of any crack.
- We clean and prepare the damaged area or the whole tray.
- Chips and cracks are filled, reinforced and sanded level.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can generally be used the day after.
Preparing for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Different materials, different repairs
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and the repair is polished to match the shine.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Nearby places to Cymer and Glyncorrwg
More services for Cymer and Glyncorrwg
About our accreditations · Every repair comes with a one-year guarantee.
