Neath Port Talbot · Wales
Non-Slip Bath Coating in Cymer and Glyncorrwg
Non-slip bath coating across Cymer and Glyncorrwg and nearby, done in a single visit in most cases.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Cymer and Glyncorrwg
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on resurfaced baths, acrylic baths and wet room floors (ask us), and common reasons people contact us are worn-out textured areas and resurfaced baths that are now too smooth.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Cymer and Glyncorrwg (SA13)
- Region
- Neath Port Talbot
- Cover
- A year, on every repair
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Work done at your home or business
- We leave the room as we found it
- Every repair guaranteed for a year
- One visit for most repairs
See our prices page.
Places near Cymer and Glyncorrwg
Other services in Cymer and Glyncorrwg
What affects the price in Cymer and Glyncorrwg
You’ll know the full cost before you book. We look at:
- How many areas need work
- How many items we do on one visit
- What kind of damage it is
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin beside the damage so we can judge size
Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Cymer and Glyncorrwg, and we will reply with a fixed quote.
Your questions about non-slip bath coating in Cymer and Glyncorrwg
What areas do you cover?
The whole UK, including all of Neath Port Talbot. Just include your postcode and we’ll confirm dates.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How do I get a price for non-slip bath coating in Cymer and Glyncorrwg?
We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your SA13 postcode.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
How it works
We agree an arrival time beforehand. Once we are there, the work takes a morning or an afternoon. We leave the room clean and you’ll know when it can be used.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before you book.
What we work on
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Do you need non-slip bath coating in Cymer and Glyncorrwg?
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Questions to ask before you book
- Who turns up on the day
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Our work in Cymer and Glyncorrwg
Cymer and Glyncorrwg is about 4 miles north of Maesteg, in Neath Port Talbot. We visit customers in Cymer and Glyncorrwg, so there is no workshop to go to. We cover all 100 towns and villages across Neath Port Talbot, from the larger towns to small villages.
Postcode districts we cover here: SA13. Close by, we cover Cymmer (1 mile south), Glyncorrwg (1 mile north-east), Abercregan (1 mile south-west), Croeserw (2 miles south) and Blaengwynfi (2 miles east). Within a short drive, we also cover Neath (7 miles west), Port Talbot (8 miles south-west), Sandfields (9 miles south-west), Mount Pleasant (7 miles west), Baglan Moors (8 miles south-west) and Sandfields West (9 miles south-west).
Around Cymer and Glyncorrwg
Typical jobs here are in homes near St John The Baptist's Church and Glyncorrwg Primary School and the streets around them. For rail, the closest station is Maesteg station, roughly 4 miles south of the centre. Further afield, we also cover the area around Maesteg Community Hospital (4.1 miles south) and Llwdarth (4.7 miles south). The countryside around Cymer and Glyncorrwg includes Cefnmawr and Llyn Fach.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
