Derbyshire · England

Shower tray repair & resurfacing in Ecton, Derbyshire

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Ecton and across Derbyshire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Edge chips from dropped bottles
  • A tray that flexes
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Ecton?

Shower tray repair in Ecton, done in place

You do not always need a new tray. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. Our technicians work on cast iron, enamelled steel and stone resin, and the jobs we see most are a tray that looks tired however much you clean it and chips caused during fitting.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.

Location
Ecton (SK17, DE6, ST13)
County
Derbyshire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

When a repair isn’t the answer

To be straight with you, some problems need a different fix:

  • A tray that flexes because it was never properly supported
  • Plumbing leaks under the tray
  • Water damage to the floor beneath the tray

Send us pictures and we’ll tell you honestly.

What we work on

  • Cast iron
  • Ceramic
  • Stone resin
  • Enamelled steel
  • Acrylic

Should you replace it?

A new shower tray normally involves taking out the enclosure and tiles, preparing a new base and re-tiling. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Colour-matched on site
  • Honest advice, even when it means no job
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted

Read our prices page.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

About Ecton

Ecton is about 7 miles east of Leek, in Derbyshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 532 places across Derbyshire. You can also see our page for Manchester, about 29 miles away.

Here we cover the SK17, DE6 and ST13 postcode area. Other places close to Ecton include Warslow (1 mile west), Butterton (2 miles south-west), The Raikes (2 miles north-east), Sheen (2 miles north-east) and Hartington (2 miles north-east). Within a short drive, we also cover Buxton (9 miles north), Matlock (13 miles east), Ashbourne (9 miles south-east), Chapel-en-le-Frith (14 miles north), Bakewell (10 miles north-east) and Darley Dale (11 miles east).

Near you in Ecton

In Ecton, that means homes near Manifold Church of England Primary School and Church of St Laurence, among other places. Well-known places in the area include Alstonefield Geohut (2.6 miles south-east). For a walk, there’s Blakemere Pond and Wetton Hill.

Map of Ecton © OpenStreetMap contributors

What we do, step by step

The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours for a repair, longer for a full resurface. At the end we talk you through how soon it can be used and how to look after it.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat
  • Open a window if you can

Getting a price

To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a fixed price

Advice

What we’re called out for in Ecton

A tired-looking tray is frequently the result of years of cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.

Most people get in touch when they notice something like this:

  • Scratches in the surface
  • A tray that looks tired however much you clean it
  • A cracked shower tray
  • Chips caused during fitting

Questions to ask before you book

  • The length of the guarantee and what it covers
  • Is the price fixed, and does it include VAT?
  • How the room is protected while they work
  • What happens if the damage is worse than the photos show

Our hiring checklist

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Avoid strong descalers and bleach
  • Use the extractor fan
  • Clean with washing-up liquid and a soft cloth
  • Reseal when the silicone splits or turns black

Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.

Every shower forces a little water into a crack, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.

What affects the price in Ecton

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Access to the area
  • How hard the colour is to match
  • How much damage there is
  • What the surface is made of

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.

Send pictures for a quote

You can typically get a fixed quote without us visiting. To make it quick:

  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Questions from Ecton

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Ecton.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.

Can you quote from photos?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Landlord and trade work in Ecton

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.