County Durham · England

Shower Tray Repair for Evenwood Gate homes

Local shower tray repair for Evenwood Gate: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A damaged area around the waste
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Evenwood Gate?

Repairs by material

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.

Shower tray repair in Evenwood Gate, done in place

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. Whether it’s staining and dullness across the tray and scuffs and light scratches, we can help, on enamelled steel, cast iron and stone resin alike.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Before and after: an old shower tray refinished by Surface Doctor
Location
Evenwood Gate (DL14)
Area hub
County Durham
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

The process

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, or most of the day to resurface the whole tray, including clearing up.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. We refinish the surface to match the tray.
  5. We clean up and give you the curing time.

Before we arrive

  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated
  • Point us to the nearest place to park

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Get a free quote

Advice

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Common questions in Evenwood Gate

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you resurface a whole tray?

Yes. We can resurface the entire tray for a fresh finish without removing it.

What does shower tray repair cost?

Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is it OK to use a cracked tray?

We would stop using it until it’s repaired, in case water is getting through.

Which areas do you work in?

We cover the entire UK, including Evenwood Gate and the rest of County Durham. Just include your postcode and we’ll offer you dates.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Is a repair better than a new one?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Repair or replace in Evenwood Gate?

A new shower tray frequently means a new enclosure fitting, new tiling and new sealant. A repair leaves all of that untouched. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Evenwood Gate

  • Rooms protected and left tidy
  • Normally one visit, start to finish
  • Colour mixed on the day to match
  • Every repair guaranteed for a year

Take a look at our prices page.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Do not ignore a tray that flexes
  • Check the seal every few months
  • Keep the bathroom well ventilated
  • Rinse away soap after showering

Check the silicone around the tray every few months, and replace it when it splits or goes black.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

When to call us in Evenwood Gate

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks normally point to an uneven base.

It’s worth getting a quote if you see:

  • A tray that looks tired however much you clean it
  • Chipped corners or rims
  • A tray that creaks or moves underfoot
  • A crack across the base

What your quote should include

  • What the guarantee covers, and for how long
  • Who turns up on the day
  • How your room will be protected
  • What prep work is covered

Our hiring checklist

Prices and what affects them

Repairs from £95. Every quote is fixed and free. What we look at:

  • Access to the area
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • The type of damage

The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus

Upload pictures of the damage and one of the whole item, and tell us you are in Evenwood Gate, and we will reply with a fixed quote.

Evenwood Gate and the surrounding area

Evenwood Gate is about 4 miles south-west of Bishop Auckland, in County Durham. Jobs in Evenwood Gate are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Evenwood Gate is one of 329 places in County Durham we cover. We work right across the region, from Evenwood Gate to Newcastle upon Tyne (26 miles away).

We work across DL14. We regularly work on streets such as Evenwood Lane, Fairfield and Randolph Terrace. Other places close to Evenwood Gate include Evenwood (1 mile north-west), Ramshaw (2 miles north-west), West Auckland (2 miles north-east), Hummerbeck (2 miles north-east) and St Helen Auckland (2 miles north-east). Further out, we also cover Durham (14 miles north-east), Newton Aycliffe (7 miles east), Bishop Auckland (4 miles north-east), Spennymoor (8 miles north-east), Shildon (4 miles east) and Crook (7 miles north).

Landmarks near Evenwood Gate

Our clients here include homes close to St Paul, The Sun Inn and Evenwood CofE Primary School and the streets around them. The closest station to Evenwood Gate is Bishop Auckland station, roughly 4.2 miles north-east. Further afield, we also cover the area around Bishop Auckland Hospital (4.1 miles north-east) and Raby Castle (2.6 miles south-west).

Map of Evenwood Gate © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.