Slough · England

Shower tray repair & resurfacing in Fulmer, Slough

Shower tray chip, crack and scratch repairs and resurfacing in Fulmer, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A crack across the base
  • A tray that looks tired however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Fulmer

Shower tray repair in Fulmer, done in place

Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. We regularly repair enamelled steel, ceramic and acrylic, and common reasons people contact us are scratches in the surface and damage around the waste.

All of our repairs are guaranteed for twelve months in Fulmer and everywhere else. We return to put right any problem with the work.

Discoloured square shower tray restored with a new white finish
Area
Fulmer (SL3)
Area hub
Slough
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

What your shower tray is made of matters

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips can be filled and matched.

Your questions about shower tray repair in Fulmer

Are there extra charges for Fulmer?

We don’t add a call-out fee. Your fixed price includes everything.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is a cracked tray repairable?

Normally, as long as it does not flex. We reinforce the crack, fill it and refinish the surface.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can you repair several things at once?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Repair or replace in Fulmer?

A new shower tray normally involves removing the screen and tiling, preparing a new base and tiling again. A repair or resurface keeps all of that in place. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish
  • Colour mixed on the day to match

See our pricing.

How it works

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours for a repair, longer for a full resurface, and we leave the room as we found it.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Clear the area around the damage
  • Make sure the area is dry

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Advice

Common problems we fix in Fulmer

On timber floors, movement can crack a tray, particularly if it wasn’t fully bedded. On solid floors, cracks typically point to an uneven base.

Typical reasons for a call-out include:

  • A damaged area around the waste
  • Movement when you stand on it
  • A cracked shower tray
  • Chips on the edges

Questions to ask before booking

  • How to look after the finish
  • If travel is included in the price
  • What happens if they find more damage
  • Who turns up on the day

How to compare quotes

When we would advise against a repair

To be straight with you, there are a few things a repair will not fix:

  • Trays cracked in several places
  • A tray that flexes because it was never properly supported
  • Water damage to the floor beneath the tray

Send us pictures and we’ll tell you honestly.

Materials we work on in Fulmer

  • Cast iron
  • Stone resin
  • Acrylic
  • Ceramic
  • Enamelled steel

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Rinse away soap after showering
  • Keep the bathroom well ventilated
  • Clean with washing-up liquid and a soft cloth
  • Keep harsh chemicals off the tray

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can cause damage underneath.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Fulmer and the surrounding area

Fulmer is about 4 miles north-east of Slough, in Slough. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Fulmer is one of 31 towns and villages in Slough we cover. Our jobs stretch from Fulmer to London (about 20 miles away).

Jobs in SL3 work the same way as everywhere else we cover. From Fulmer Road, Alderbourne Lane and Hay Lane or anywhere nearby, we can come to you. If you are just outside Fulmer, we cover Tatling End (1 mile north-east), Wexham Street (1 mile south-west), Gerrards Cross (1 mile north), Stoke Poges (2 miles south-west) and Rush Green (2 miles east). We also work in nearby towns such as Slough (4 miles south-west), Cippenham (5 miles south-west), Chalvey (4 miles south-west), Britwell (3 miles south-west), Langley (4 miles south) and Upton (4 miles south).

Around Fulmer

Our clients here include homes close to Church of St James, Bulstrode Park and Khalsa Secondary Academy and the streets around them. Other local landmarks include The Black Horse Public House (within half a mile south-west) and Fulmer Infant School (under half a mile south). The closest station to Fulmer is Gerrards Cross station, about 1.9 miles north of the centre. Further afield, we also cover the area around British Airways Heritage Collection (3.5 miles south-east) and Wexham Park Hospital (2.2 miles south). Green spaces nearby include Horse Shoe Bay and Stoke Common.

Map of Fulmer © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.