Dumfries and Galloway · Scotland
Shower tray repair & resurfacing in Glenluce, Dumfries and Galloway
Shower tray chip, crack and scratch repairs and resurfacing in Glenluce, carried out at your home and guaranteed for a year.
- Repairs from £95
- A tray that flexes
- Damage around the waste
Shower tray repair in Glenluce without replacing anything
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the screen and tiling stay as they are. We regularly repair ceramic, acrylic and enamelled steel, and people most often call us about a tray that looks tired however much you clean it and a tray that creaks or moves underfoot.
All of our repairs are guaranteed for twelve months in Glenluce and everywhere else. If something goes wrong with the work, we come back.
- Where
- Glenluce (DG8)
- Region
- Dumfries and Galloway
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need shower tray repair in Glenluce?
Trays fitted on timber floors can crack if the floor moves, particularly if it wasn’t fully bedded. On solid floors, cracks generally point to an uneven base.
The most common problems we are called about are:
- Cracks running from the waste
- Staining and dullness across the tray
- Movement when you stand on it
- A damaged area around the waste
Comparing quotes
- What protection goes down before work starts
- How long the guarantee is and what it covers
- What aftercare is recommended
- What prep work is covered
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A tray that flexes because it was never properly supported
- A tray broken in more than one place
- Plumbing leaks under the tray
Send us pictures and we’ll tell you honestly.
What we work on
- Ceramic
- Acrylic
- Stone resin
- Cast iron
- Enamelled steel
What shower tray repair costs
Prices start from £95. We don’t charge extra for travel to Glenluce. The price depends on:
- What kind of damage it is
- Doing more than one item at once
- The material and finish
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Phone pictures are fine. Just ensure we can see:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- One picture of the entire shower tray
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Where we work around Glenluce
Glenluce is about 9 miles east of Stranraer, in Dumfries and Galloway. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 138 places across Dumfries and Galloway. We work right across the region, from Glenluce to Glasgow (about 71 miles away).
Here we cover the DG8 postcode area. You will find streets such as Main Street, St John Street and Balkail Avenue. Other places close to Glenluce include Dunragit (3 miles west), New Luce (5 miles north), Castle Kennedy (6 miles west), Aird (7 miles west) and Lime Kiln (7 miles west). Further out, we also cover Stranraer (9 miles west), Newton Stewart (14 miles north-east), Portpatrick (12 miles west), Wigtown (15 miles east) and Minnigaff (14 miles north-east).
Landmarks near Glenluce
Typical jobs here are in homes near Glenluce and the streets around them. The countryside around Glenluce includes Whitefield Loch and Knock Fell.
Towns and villages near Glenluce
What else we do in Glenluce
Repairs by material
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Do not ignore a tray that flexes
- Keep harsh chemicals off the tray
- Stick to gentle cleaners
- Rinse the tray after each shower
Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.
A tray that moves underfoot needs looking at, before it cracks.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, or most of a day for a full resurface. If we find something your photos didn’t show, we will explain it before carrying on.
- We make sure the tray doesn’t flex and look for the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We colour-match the repair, or spray a new finish across the whole tray.
- We leave it to cure; the shower is normally usable the day after.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Open a window if you can
Get a quote
If you are in Glenluce and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Landlord and trade work in Glenluce
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Glenluce questions
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you work in Glenluce?
We do. Repair technicians travel to Glenluce from across the region, and the price is the same as everywhere else.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is a cracked shower tray safe to use?
We would stop using it until it’s repaired, in case water is getting through.
Can you fix a cracked tray?
In most cases. A tray that moves needs its support sorting before the repair.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
