Shropshire · England
Shower tray repair & resurfacing in Harmer Hill, Shropshire
Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Harmer Hill and across Shropshire. Send pictures for a free, fixed quote.
- Repairs from £95
- A damaged area around the waste
- Chips caused during fitting
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Acrylic
Acrylic-capped trays are lighter, so good support matters. Cracks and scratches can be repaired.
Shower tray repair in Harmer Hill, done in place
In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. The colour and finish are matched. Typical jobs include a tray that creaks or moves underfoot and damage from a refit or building work, on ceramic, stone resin and acrylic.
Every job is backed for twelve months in Harmer Hill and everywhere else. We return to put right any problem with the work.
- Where
- Harmer Hill (SY4)
- County
- Shropshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Harmer Hill
What else we do in Harmer Hill
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t use strong acids or bleach
- Do not ignore a tray that flexes
- Rinse away soap after showering
- Store bottles off the tray
Rinse the tray after use, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.
A tray that moves underfoot needs looking at, before it cracks or gets worse.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Trays cracked in several places
- Leaking waste fittings
- A tray that moves underfoot
If in doubt, send photos and we will say what we think before you book.
What we work on
- Acrylic
- Ceramic
- Enamelled steel
- Cast iron
- Stone resin
FAQs for Harmer Hill
How long before I can shower?
You will get the exact time when we finish.
How do I get a price for shower tray repair in Harmer Hill?
Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you work in Harmer Hill?
Yes, we do. Repair technicians travel to Harmer Hill from across the region, with no extra charge for travel.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can a stained tray be refinished?
Yes. A full resurface makes a tired tray look fresh.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Harmer Hill and the surrounding area
Harmer Hill is about 6 miles north of Shrewsbury, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Harmer Hill is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 43 miles away.
Postcode districts we cover here: SY4. You’ll find streets such as The Hollow, Wem Road and Bridgewater Place, all of which we cover. Other places close to Harmer Hill include Yorton Heath (1 mile east), Sansaw Heath (1 mile east), Haston (1 mile south-east), Preston Gubbals (2 miles south) and Bomere Heath (2 miles south-west). Within a short drive, we also cover Shrewsbury (6 miles south), Oswestry (13 miles west), Market Drayton (13 miles north-east), Coleham (6 miles south), Kingsland (6 miles south) and Whitchurch (12 miles north).
Local landmarks in Harmer Hill
Our clients here include homes close to Church of St Mary and The Red Castle pub, among other places. For rail, the closest station is Yorton station, about 1.2 miles north-east of the centre. Further afield, we also cover the area around Myddle Castle (1.6 miles north-west).
How the visit works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours, or most of the day to resurface the whole tray. Before we leave, we explain how soon it can be used and how to care for it.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- We leave it to cure; the shower is generally usable the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Let the surface dry out before the visit
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Repair or replace in Harmer Hill?
A new shower tray typically means taking out the enclosure and tiles, relaying the base and tiling again. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Colour-matched on site
- No need to remove anything
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
Read our pricing.
Common problems we fix in Harmer Hill
Cracks often start at the waste, where the tray is cut and the fitting is tightened.
You may need us if you’ve spotted:
- Staining and dullness across the tray
- Chips caused during fitting
- A tray that creaks or moves underfoot
- Scratches from cleaning or grit
Comparing quotes
- What the guarantee covers, and for how long
- How the room is protected while they work
- What preparation is included
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
