Shropshire · England
Worktop Repair for Harmer Hill homes
Worktop repair in and around Harmer Hill: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chipped edge
- A damaged sink edge
Worktop repair at your home in Harmer Hill
Burns from hot pans, chips on edges and scratches from knives make up most of our worktop work. We repair them all in your kitchen. Typical jobs include burns from hot pans and cuts and scratches in the surface, on granite & marble, solid wood and solid surface (such as Corian).
A one-year guarantee comes as standard.
- Location
- Harmer Hill (SY4)
- Region
- Shropshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Harmer Hill
Harmer Hill is about 6 miles north of Shrewsbury, in Shropshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Harmer Hill is one of 433 towns and villages in Shropshire we cover. You can also see our page for Birmingham, about 43 miles away.
Our technicians cover all of the SY4 postcode area and the streets around it. You’ll find streets such as The Hollow, Wem Road and Bridgewater Place, all of which we cover. Close by, we cover Yorton Heath (1 mile east), Sansaw Heath (1 mile east), Haston (1 mile south-east), Preston Gubbals (2 miles south) and Bomere Heath (2 miles south-west). Within a short drive, we also cover Shrewsbury (6 miles south), Oswestry (13 miles west), Market Drayton (13 miles north-east), Coleham (6 miles south), Kingsland (6 miles south) and Whitchurch (12 miles north).
Landmarks near Harmer Hill
Around Harmer Hill, we work in homes near Church of St Mary and The Red Castle pub. Harmer Hill’s nearest station is Yorton station, about 1.2 miles north-east. Nearby you’ll also find Myddle Castle (1.6 miles north-west).
Landlord and trade work in Harmer Hill
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What your worktop is made of matters
Wood
Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.
Laminate
Laminate is a printed surface bonded to a board. Damage is filled and the pattern painted in by hand.
Places near Harmer Hill
More services for Harmer Hill
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- First, we check the damage and the finish we need to match.
- Burnt or loose material is cut back.
- We fill and shape the damaged area.
- We recreate the pattern, flecks or grain.
- It’s finished to the same sheen and left to cure.
Before we arrive
- Make sure the room can be ventilated
- Clear the area around the damage
- Tell us about parking, stairs or access
Getting a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Harmer Hill, and we’ll come back with a fixed quote.
Read more
Prices and what affects them
Prices start from £95. You’ll know the full cost before you book. We look at:
- Unusual colours or finishes
- How many areas need work
- Whether old repairs or coatings need taking off
- The material and finish
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- A wider photo showing the entire worktop
- Whether it’s been repaired or coated before
- Natural light rather than flash
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we cannot put right
It helps to know what we cannot do too:
- Failed support under the worktop
- Laminate swollen by water from underneath
- Through cracks in stone that is moving
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Quartz
- Laminate
- Solid surface (such as Corian)
- Granite & marble
- Solid wood
Harmer Hill questions
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
How much does worktop repair cost in Harmer Hill?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Are there extra charges for Harmer Hill?
Travel is included in the price, and we charge the same wherever you are.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Repairing versus replacing in Harmer Hill
Replacing a worktop means taking out the damaged top, templating and fitting a replacement and refitting the sink and hob, and it may not match the rest of the kitchen. Repairing the damage leaves the worktop in place. Prices start from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- CHAS and Constructionline accredited
- Work done at your home or business
- Rooms protected and left tidy
- One visit for most repairs
Read our pricing.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Re-oil timber worktops
- Take care with heavy pans near edges
- Steer clear of strong cleaners
- Don’t cut directly on the worktop
Keep joints and the sink edge dry, especially on laminate and wood.
Daily use can make burns and chips worse. An earlier repair is a smaller repair.
Do you need worktop repair in Harmer Hill?
Water around the sink can get into laminate and wood joints, which can cause swelling.
Keep an eye out for any of the following:
- Chips caused during installation
- Cuts and scratches in the surface
- A chipped edge
- A chipped quartz edge
What your quote should include
- When it can be used again
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
