Oxfordshire · England

Shower Tray Repair for Henwood homes

Damaged shower tray in Henwood? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Damage around the waste
  • Staining and dullness across the tray
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Henwood

Signs you need shower tray repair in Henwood

Most chips come from things dropped in the shower, generally along the edges or by the waste.

Common reasons people in Henwood contact us include:

  • Snagging damage in a new bathroom
  • Chips on the edges
  • A tray that looks tired however much you clean it
  • A tray that creaks or moves underfoot

Questions to ask before you book

  • How to look after the finish
  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the pictures show
  • How the colour is matched

How to compare quotes

Shower tray repair in Henwood without replacing anything

A cracked or chipped shower tray doesn’t always need replacing. If it’s solid underneath, it can typically be repaired in place, which is far less work than a replacement. We regularly repair enamelled steel, acrylic and cast iron, and common reasons people get in touch are damage from a refit or building work and scratches in the surface.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Where
Henwood (OX1)
Region
Oxfordshire
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What shower tray repair costs

Repairs from £95. You will know the full cost before booking. We take into account:

  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • The colour and finish to match
  • What the surface is made of

There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

We price nearly every job from pictures. This is what we need:

  • Good light, ideally daylight, without flash glare
  • The postcode, so we can plan the visit
  • The material, if you know it
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Ventilate the room after showers
  • Avoid strong descalers and bleach
  • Do not stand heavy bottles on the tray
  • Replace failing sealant promptly

Give the repair its full curing time before showering. After that, gentle cleaning and good ventilation keep it in good shape.

Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can cause damage underneath.

The process

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours for a repair, longer for a full resurface, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Ask for a price

Most customers in Henwood get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a fixed price

Related advice

About Henwood

Henwood is about 3 miles north-west of Abingdon-on-Thames, in Oxfordshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Henwood is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 55 miles away.

Every address in OX1 is within our area. Streets in the area include Cumnor Road, Hill View Lane and White Hill Lane, and we cover them all. Neighbouring places we cover include Wootton (1 mile south), Cumnor (1 mile north-west), Chawley (1 mile north), Appleton (2 miles west) and Dean Court (2 miles north). Within a short drive, we also cover Oxford (5 miles north-east), Didcot (8 miles south-east), Bicester (15 miles north-east), Abingdon-on-Thames (3 miles south-east), Witney (9 miles north-west) and Carterton (12 miles west).

What’s near Henwood

In Henwood, that means homes near Wootton St Peter's Church of England Primary School, Church of St Peter and Matthew Arnold School. The closest station to Henwood is Oxford station, roughly 3.4 miles north-east. Nearby you will also find Westgate Shopping Centre (3.5 miles north-east) and The Story Museum (3.6 miles north-east). Green spaces nearby include Cumnor Hill and Lashford Lane Fen.

Map of Henwood © OpenStreetMap contributors

Henwood questions

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is there any odour?

Some materials have a smell while they’re applied. It fades as everything cures.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can I keep using a cracked tray?

We’d stop using it until it’s repaired, because water may be getting underneath.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Honest limits

In fairness, there are a few things a repair will not fix:

  • Movement caused by a poor base, until the support is fixed
  • Rotten or damaged flooring underneath
  • Plumbing leaks under the tray

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Acrylic
  • Ceramic
  • Cast iron
  • Enamelled steel
  • Stone resin

For landlords and businesses

We are used to working with agents and managing companies. Send the address, photos and access details.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Different materials, different repairs

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.