Cheshire West and Chester · England
Shower Tray Repair for Higher Burwardsley homes
Damaged shower tray in Higher Burwardsley? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Scratches from cleaning or grit
- A tray that looks tired however much you clean it
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a few hours, or most of the day to resurface the whole tray. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We match the colour, or refinish the full tray.
- We leave it to cure; the shower is normally usable the day after.
Before we arrive
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed quote the same day in most cases.
Read more
Shower tray repair in Higher Burwardsley without replacing anything
Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. We match the colour and finish so the repair blends in. Our repair technicians work on cast iron, enamelled steel and acrylic, and common reasons people contact us are a cracked shower tray and movement when you stand on it.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Higher Burwardsley (CH3)
- Area hub
- Cheshire West and Chester
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Higher Burwardsley
Other services in Higher Burwardsley
Why repair rather than replace?
A new shower tray normally involves taking out the enclosure and tiles, preparing a new base and tiling again. A repair or resurface leaves all of that alone. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking.
What you get with us
- A fixed quote before you book
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
Read our prices page.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many items we do on one visit
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- Natural light rather than flash
- A wider photo showing the entire shower tray
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Different materials, different repairs
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Common problems we fix in Higher Burwardsley
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
Look out for any of the following:
- Damage around the waste
- A dull, stained or worn surface
- A tray that creaks or moves underfoot
- Cracks running from the waste
What your quote should include
- Aftercare advice
- Who will actually do the work
- How your room will be protected
- How the colour is matched
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Multiple cracks across the tray
- Leaks from the waste or pipework (a plumber’s job)
- A tray that flexes because it was never properly supported
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Ceramic
- Cast iron
- Stone resin
- Enamelled steel
FAQs for Higher Burwardsley
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you resurface a whole tray?
Yes. The whole tray can be resurfaced.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Covering Higher Burwardsley
Higher Burwardsley is about 8 miles west of Nantwich, in Cheshire West and Chester. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We cover 224 places in Cheshire West and Chester. We work right across the region, from Higher Burwardsley to Liverpool (23 miles away).
We cover every part of CH3. From Pennsylvania Lane and Barracks Lane or a nearby road, we can come to you. Other places close to Higher Burwardsley include Burwardsley (1 mile west), Newtown (2 miles north-west), Newton (2 miles north-west), Newton-by-Tattenhall (2 miles north-west) and Tattenhall (3 miles north-west). We also work in nearby towns such as Chester (9 miles north-west), Ellesmere Port (14 miles north-west), Winsford (9 miles north-east), Northwich (13 miles north-east), Boughton (9 miles north-west) and Frodsham (13 miles north).
Landmarks near Higher Burwardsley
In Higher Burwardsley, that means homes near St John's Church and the streets around them. Other landmarks nearby include Museum of Amusements (2.4 miles north-west) and Peckforton Castle (0.9 miles north-east). For a walk, there’s Bickerton Hill.
How to look after the repair
Simple care helps the repair last. We recommend:
- Keep harsh chemicals off the tray
- Replace failing sealant promptly
- Stick to gentle cleaners
- Keep the bathroom well ventilated
Keep heavy bottles off the tray floor, so they cannot be knocked over.
Do not keep using a cracked tray. Water can get through to the floor and walls, and the damage below isn’t visible.
About our accreditations · Every repair comes with a one-year guarantee.
