Worcestershire · England
Shower tray repair & resurfacing in Honeybourne, Worcestershire
Shower tray chip, crack and scratch repairs and resurfacing at your home in Honeybourne, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage in a new bathroom
- Scuffs and light scratches
Shower tray repair in Honeybourne, done in place
A worn or stained tray can be resurfaced, giving it a fresh, even finish. Whether it’s scratches in the surface and staining and dullness across the tray, we can help, on acrylic, ceramic and cast iron alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Honeybourne (WR11)
- Area hub
- Worcestershire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about shower tray repair in Honeybourne
Can you make an old tray look new?
Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send photos?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is it OK to use a cracked tray?
Not until you know the crack is not letting water through. Look for damp or stains below.
Where we work around Honeybourne
Honeybourne is about 5 miles east of Evesham, in Worcestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Honeybourne is one of 376 towns and villages in Worcestershire where we work. Our jobs stretch from Honeybourne to Birmingham (about 26 miles away).
Postcode districts we cover here: WR11. We regularly work on streets such as Station Road, High Street and Clun Forest Way. We also cover the places around Honeybourne: Cow Honeybourne (1 mile south-west), Bretforton (2 miles west), Weston-sub-Edge (2 miles south), Badsey (3 miles west) and Saintbury (3 miles south). Within a short drive, we also cover Redditch (15 miles north), Evesham (5 miles west), Pershore (11 miles west), Bengeworth (4 miles west), Matchborough (14 miles north) and Winyates (15 miles north).
Around Honeybourne
Locally, our jobs take us to homes close to Honeybourne First School and Church of St Ecgwin. Honeybourne has its own railway station: Honeybourne station. Other landmarks nearby include Court Barn (3.9 miles south-east). The countryside around Honeybourne includes Dover's Hill.
Do you need shower tray repair in Honeybourne?
Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.
Look out for these signs:
- A tray that flexes
- Chips on the edges
- Scratches in the surface
- A crack across the base
Comparing quotes
- What preparation is included
- How the colour is matched
- What the guarantee covers, and for how long
- If travel is included in the price
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours, or most of a day for a full resurface. We tidy up before we leave and let you know when you can use it again.
- First we check the tray is solid and work out why any crack happened.
- We clean and prepare the damaged area or the whole tray.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the whole tray.
- We leave it to cure; the shower is usually usable the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Ensure the area is dry
How to get a price
Most clients in Honeybourne get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
How to look after the repair
How the surface is treated afterwards matters:
- Store bottles off the tray
- Ventilate the room after showers
- Keep harsh chemicals off the tray
- Use a mild, non-abrasive cleaner
Rinse the tray after use, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.
Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.
Also near Honeybourne
Other services in Honeybourne
Materials and what they mean for the repair
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Acrylic
Acrylic-capped trays are lighter, so a firm base is essential. Cracks and scratches can be repaired.
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. What matters most is:
- The material
- Doing more than one item at once
- How many areas need work
- How easy the damage is to reach
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- One picture of the entire shower tray
- Good light, ideally daylight, without flash glare
If you’re in Honeybourne and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Rotten or damaged flooring underneath
- A tray that flexes because it was never properly supported
- Leaking waste fittings
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Honeybourne
- Enamelled steel
- Cast iron
- Ceramic
- Acrylic
- Stone resin
Landlord and trade work in Honeybourne
For anyone letting property in or around Honeybourne, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
