Norfolk · England

Shower Tray Repair for Honing homes

Our technicians come to Honing for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • A crack across the base
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Honing?

Honing questions

Do you cover Honing?

Yes, we do. We send a technician to Honing for every job, and the price is the same as everywhere else.

Can I keep using a cracked tray?

Only if you are sure it is not leaking. Look for damp or stains below.

How much does shower tray repair cost in Honing?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can a cracked shower tray be repaired?

Typically, if the tray is firmly supported. The crack is reinforced, filled and refinished.

What areas do you cover?

All of Norfolk, and the rest of the UK. There’s no extra charge for travel.

Are there extra charges for Honing?

We do not add a call-out fee. Your fixed quote includes everything.

Will the price change on the day?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

About our shower tray repair in Honing

You don’t always need a new tray. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. We work on cast iron, acrylic and stone resin, and common reasons people get in touch are scratches in the surface and a dull, stained or worn surface.

All our work is covered by our one-year guarantee, wherever you are in Norfolk.

Before and after: an old shower tray refinished by Surface Doctor
Where
Honing (NR28)
Area hub
Norfolk
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What your shower tray is made of matters

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.

Ceramic

Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and the repair is polished to match the shine.

Honing and the surrounding area

Honing is about 3 miles south-east of North Walsham, in Norfolk. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Honing is one of 797 towns and villages in Norfolk we cover.

Here we cover the NR28 postcode area. Streets in the area include The Street, Station Road and East Ruston Road, and we cover them all. Other places close to Honing include Briggate (1 mile west), Bengate (1 mile west), Lyngate (1 mile south-west), East Ruston (1 mile east) and Dilham (2 miles south). Within a short drive, we also cover Norwich (13 miles south-west), Sprowston (11 miles south-west), Thorpe St Andrew (12 miles south), North Walsham (3 miles north-west), Caister-on-Sea (15 miles south-east) and Sheringham (14 miles north-west).

Local landmarks in Honing

Locally, our jobs take us to homes close to Church of St Peter and St Paul and East Ruston Village Green and the streets around them. For rail, the closest station is Worstead station, about 2.3 miles south-west. Well-known places in the area include Dilham Castle (1.1 miles south-east) and Norfolks Golden Fleece Heritage Museum (1.4 miles west). For a walk, there is Barton Broad and Catfield Fen Reserve.

Map of Honing © OpenStreetMap contributors

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, or most of the day to resurface the whole tray, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. We colour-match the repair, or spray a new finish across the entire tray.
  5. The tray is left to cure and can generally be used the next day.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Make sure the area is dry
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Honing, and we’ll come back with a fixed quote.

Get a free quote

Read more

What a repair can’t fix

A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:

  • Rotten or damaged flooring underneath
  • Movement caused by a poor base, until the support is fixed
  • Multiple cracks across the tray

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Enamelled steel
  • Stone resin
  • Acrylic
  • Ceramic
  • Cast iron

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Reseal when the silicone splits or turns black
  • Report any creaking or movement early
  • Clean with washing-up liquid and a soft cloth
  • Give the tray a quick rinse after use

Keep heavy bottles off the tray floor, so they can’t be knocked over.

A tray that moves underfoot needs looking at, before it cracks.

Work for landlords and builders

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We work for landlords, letting agents and housing providers in Honing as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

Why repair rather than replace?

The tray is normally the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. A repair keeps everything as it is. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why Honing customers choose us

  • One visit for most repairs
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair

See our prices page.

Prices and what affects them

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • Access to the area
  • Unusual colours or finishes
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

Before you send photos, a few simple things make all the difference:

  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • Any details about the material

A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.