Cambridgeshire · England
Shower Tray Repair for Horningsea homes
Damaged shower tray in Horningsea? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A damaged area around the waste
- Scratches from cleaning or grit
Shower tray repair at your home in Horningsea
A worn or stained tray can be resurfaced, giving it a fresh, even finish without removing the screen or tiles. We regularly repair stone resin, ceramic and acrylic, and people most frequently call us about damage around the waste and a crack across the base.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Horningsea (CB25)
- Area hub
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, or most of the day to resurface the whole tray. If we find something your pictures didn’t show, we will explain it before carrying on.
- The surrounding area is sheeted and masked.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We clean up and give you the curing time.
How to prepare
- Clear the area around the damage
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Your questions about shower tray repair in Horningsea
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you cover the entire of Cambridgeshire?
Across the UK, so Horningsea is covered. Prices don’t change with location.
Are there extra charges for Horningsea?
Travel is included in the price, with the same prices everywhere we work.
When can I use the shower again?
We’ll give you the curing time on the day.
Can I keep using a cracked tray?
Not until you know the crack is not letting water through. Check the ceiling below for damp.
Do you redo the sealant?
Yes. We can repair and reseal on the same visit.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Our work in Horningsea
Horningsea is about 3 miles north-east of Cambridge, in Cambridgeshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover all 371 towns and villages in Cambridgeshire. Our jobs stretch from Horningsea to London (53 miles away).
Every address in CB25 is covered, from the main roads to the quietest streets. Whether you live on High Street, St John's Lane and Church End or a nearby road, we can come to you. If you’re just outside Horningsea, we cover Milton (1 mile west), Clayhithe (1 mile north-east), Fen Ditton (2 miles south), Waterbeach (2 miles north) and Landbeach (2 miles north-west). Within a short drive, we also cover Cambridge (3 miles south-west), St Ives (13 miles north-west), Newmarket (9 miles east), Ely (12 miles north), Cambourne (11 miles west) and Soham (9 miles north-east).
Landmarks near Horningsea
Around Horningsea, we work in homes near Bramblefields, Milton Church of England Primary School and The Plough And Fleece pub. The closest station to Horningsea is Waterbeach station, roughly 1.5 miles north. Nearby you will also find Brookfields Hospital (3.3 miles south-west) and Cambridge Castle (3.6 miles south-west). Open spaces near Horningsea include Cherry Hinton Pit.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Movement caused by a poor base, until the support is fixed
- Water damage to the floor beneath the tray
- Trays cracked in several places
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Stone resin
- Cast iron
- Enamelled steel
- Acrylic
- Ceramic
Should you replace it?
The tray is usually the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- No need to remove anything
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
- Technicians who travel to you, UK-wide
Read our prices page.
When to call us in Horningsea
On timber floors, movement can crack a tray, particularly if it wasn’t fully bedded. On concrete, an uneven base is the usual cause.
Clients normally contact us about:
- A cracked shower tray
- Snagging damage in a new bathroom
- Scratches in the surface
- A dull, stained or worn surface
Before booking anyone
- When it can be used again
- What the guarantee covers, and for how long
- Whether the price covers travel
- Who will actually do the work
What affects the price in Horningsea
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- What kind of damage it is
- Where the damage is and how we get to it
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire shower tray
- Any earlier repairs or coatings
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Materials and what they mean for the repair
Stone resin
Stone resin trays are rigid and slim. A flat, solid base is essential, and we match repairs to the surface finish.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Towns and villages near Horningsea
Also in Horningsea
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Landlord and trade work in Horningsea
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
