Kent · England
Shower Tray Repair for Lamberhurst Quarter homes
Local shower tray repair for Lamberhurst Quarter: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A damaged area around the waste
- A dull, stained or worn surface
Repairs by material
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and we match repairs to the surface finish.
Shower tray repair at your home in Lamberhurst Quarter
We repair a lot of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We’re often asked to fix chips on the edges and scuffs and light scratches, across ceramic, enamelled steel and stone resin.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Lamberhurst Quarter (TN3)
- Area hub
- Kent
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Lamberhurst Quarter
Cracks often start at the waste, where the tray is cut and the fitting is tightened.
You may need us if you’ve spotted any of these:
- Staining and dullness across the tray
- Snagging damage in a new bathroom
- Damage around the waste
- Movement when you stand on it
What to look for in a quote
- How the room is protected while they work
- How the colour is matched
- How to look after the finish
- Who will actually do the work
How to look after the repair
So the finish stays in good condition:
- Give the tray a quick rinse after use
- Do not use strong acids or bleach
- Keep heavy bottles on a shelf
- Do not ignore a tray that flexes
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.
Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a few hours, or most of the day to resurface the whole tray. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We make sure the tray doesn’t flex and look for the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- The repair is colour-matched, or the whole tray gets a new finish.
- We leave it to cure; the shower is generally usable the day after.
How to prepare
- Point us to the nearest place to park
- Have a window or extractor fan available
- Tell us about parking, stairs or access
How to get a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
Towns and villages near Lamberhurst Quarter
What else we do in Lamberhurst Quarter
What we cannot put right
Some jobs aren’t right for a repair, including:
- Leaks from the waste or pipework (a plumber’s job)
- Movement caused by a poor base, until the support is fixed
- Rotten or damaged flooring underneath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic
- Cast iron
- Stone resin
- Ceramic
- Enamelled steel
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Questions from Lamberhurst Quarter
What happens after I send pictures?
We come back with a fixed price. You are under no obligation.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
How do I get a price for shower tray repair in Lamberhurst Quarter?
Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can a stained tray be refinished?
Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.
Do you cover the entire of Kent?
Everywhere in the UK, Lamberhurst Quarter included. There’s no extra charge for travel.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Lamberhurst Quarter and nearby
Lamberhurst Quarter is about 4 miles south of Paddock Wood, in Kent. From the centre of Lamberhurst Quarter to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 922 towns and villages in Kent. Our nearest city page is London, about 33 miles away.
Jobs in TN3 are booked in the same way as anywhere else. Other places close to Lamberhurst Quarter include Key's Green (1 mile north), Petteridge (2 miles north-east), Lamberhurst (2 miles south-east), Matfield (2 miles north) and Pembury (2 miles north-west). Within a short drive, we also cover Maidstone (12 miles north-east), Sevenoaks (13 miles north-west), Royal Tunbridge Wells (4 miles west), Tonbridge (7 miles north-west), Kings Hill (11 miles north) and Foley Park (13 miles north-east).
What’s near Lamberhurst Quarter
The closest station to Lamberhurst Quarter is Frant station, about 3.3 miles west. Further afield, we also cover the area around Old Scotney Castle (2.9 miles south-east) and Pembury Hospital (3.1 miles north-west). Green spaces nearby include Bewl Water and Tudeley Woods RSPB reserve.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What affects the price in Lamberhurst Quarter
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How hard the colour is to match
- How many areas need work
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Any details about the material
- A close-up of the damage, in focus
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
