North Yorkshire · England

Shower tray repair & resurfacing in Marton, North Yorkshire

Shower tray repair in and around Marton: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • A dull, stained or worn surface
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Marton?

Different materials, different repairs

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base isn’t fully supported, and chips can be filled and matched.

Shower tray repair at your home in Marton

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. The colour and finish are matched. Our technicians work on ceramic, stone resin and enamelled steel, and the jobs we see most are a cracked shower tray and a damaged area around the waste.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Before and after: an old shower tray refinished by Surface Doctor
Area
Marton (YO51)
Area hub
North Yorkshire
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

How it works

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours, or most of the day to resurface the whole tray. At the end we talk you through how soon it can be used and how to care for it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available
  • Keep children and pets away from the room on the day

How to get a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Send pictures for a quote

Read more

Repair or replace in Marton?

The tray is usually the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. Repairing it avoids that disruption. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Why Marton customers choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK
  • Colour-matched on site
  • One-year guarantee on every repair

See our pricing.

Where we work around Marton

Marton is about 5 miles north-east of Knaresborough, in North Yorkshire. Clients in Marton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Marton is one of 626 places in North Yorkshire where we work. Our jobs stretch from Marton to Leeds (19 miles away).

Here we cover the YO51 postcode area. We regularly work on streets such as Church Lane, Kiln Garth and Back Lane and the roads around them. Nearby, we also work in Grafton (1 mile north), Branton Green (2 miles east), Great Ouseburn (2 miles east), Lower Dunsforth (2 miles north-east) and Little Ouseburn (2 miles south-east). Further out, we also cover Harrogate (8 miles south-west), Knaresborough (5 miles south-west), Ripon (8 miles north-west), Tadcaster (13 miles south), Starbeck (7 miles south-west) and Thirsk (12 miles north).

Local landmarks in Marton

Our customers here include homes close to Christ Church and Punch Bowl Inn. Marton’s nearest station is Cattal station, about 4.6 miles south-east of the centre. A little further out are Aldborough Roman Town (2.3 miles north).

Map of Marton © OpenStreetMap contributors

Do you need shower tray repair in Marton?

Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Timber floors that move can cause it too.

If you can see any of these, send us a picture:

  • Damage from a refit or building work
  • Edge chips from dropped bottles
  • Movement when you stand on it
  • Staining and dullness across the tray

Before booking anyone

  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • Whether the price covers travel
  • Who will actually do the work

How to compare quotes

Keeping it looking good

Aftercare is simple:

  • Do not use strong acids or bleach
  • Don’t ignore a tray that flexes
  • Keep heavy bottles on a shelf
  • Rinse away soap after showering

Store heavy bottles on a shelf, not on the tray, so they can’t be knocked over.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.

Marton questions

Do you cover Marton?

Yes, we do. We send a technician to Marton for every job, with no extra charge for travel.

Can you fix a cracked tray?

Usually, as long as it does not flex. We reinforce the crack, fill it and refinish the surface.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can a stained tray be refinished?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What shower tray repair costs

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • How hard the colour is to match
  • Any earlier repairs that need removing first
  • The type of damage

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Send photos for a quote

You can take the pictures on your phone. Just ensure we can see:

  • Natural light rather than flash
  • The material, if you know it
  • Something in shot to show the size
  • One picture of the whole shower tray

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can price the job.

Honest limits

We will not take on work that won’t last, so these are the limits:

  • A tray broken in more than one place
  • A tray that moves underfoot
  • Rotten or damaged flooring underneath

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Cast iron
  • Stone resin
  • Enamelled steel
  • Acrylic
  • Ceramic

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.