North Yorkshire · England
Bath re-enamelling & resurfacing in Marton, North Yorkshire
Bath re-enamelling in Marton without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
About our bath re-enamelling in Marton
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and people most frequently call us about a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Marton (YO51)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
What affects the price in Marton
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How much damage there is
- Unusual colours or finishes
- How many items we do on one visit
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- One picture of the whole bath
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Signs you need bath re-enamelling in Marton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A roll-top that’s seen better days
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
- Several chips and rust patches
Before booking anyone
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- When it can be used again
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Marton. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Marton clients choose us
- Dust sheets down, tidy finish
- Nothing taken out or refitted
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or guide to resurfacing and replacement costs.
Keeping it looking good
Nothing complicated is needed:
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Marton: your questions answered
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Places near Marton
Also in Marton
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Covering Marton
Marton is about 5 miles north-east of Knaresborough, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 626 places across North Yorkshire, from the larger towns to small villages. Our jobs stretch from Marton to Leeds (about 19 miles away).
Postcode districts we cover here: YO51. From Church Lane, Kiln Garth and Back Lane or anywhere nearby, a technician can come to you. If you are just outside Marton, we cover Grafton (1 mile north), Branton Green (2 miles east), Great Ouseburn (2 miles east), Lower Dunsforth (2 miles north-east) and Little Ouseburn (2 miles south-east). Larger places within reach include Harrogate (8 miles south-west), Knaresborough (5 miles south-west), Ripon (8 miles north-west), Tadcaster (13 miles south), Starbeck (7 miles south-west) and Thirsk (12 miles north).
Near you in Marton
We visit homes around Christ Church and Punch Bowl Inn. For rail, the closest station is Cattal station, roughly 4.6 miles south-east. Other landmarks nearby include Aldborough Roman Town (2.3 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
