Dorset · England
Shower tray repair & resurfacing in Milborne Wick, Dorset
Shower tray repair in Milborne Wick without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- Snagging damage in a new bathroom
- A crack across the base
How we handle shower tray repair in Milborne Wick
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. Common call-outs are for cracks running from the waste and chips or cracks by the plughole, on enamelled steel, ceramic and cast iron.
All of our repairs are guaranteed for twelve months in Milborne Wick and everywhere else. We return to put right any problem with the work.
- Area
- Milborne Wick (DT9)
- Area hub
- Dorset
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
We will always be straight with you, so here’s what a repair can’t fix:
- A tray that moves underfoot
- Plumbing leaks under the tray
- Damage below the tray that needs a builder
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Enamelled steel
- Acrylic
- Cast iron
- Ceramic
- Stone resin
How we price shower tray repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- Access to the area
- The material and finish
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
You can take the photos on your phone. Just ensure we can see:
- One sharp close-up of the damage
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed quote.
Milborne Wick and nearby
Milborne Wick is about 8 miles east of Yeovil, in Dorset. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Milborne Wick is one of 462 places in Dorset where we work.
We cover every part of DT9. Other places close to Milborne Wick include Milborne Port (1 mile south-east), Henstridge Bowden (1 mile east), Oborne (2 miles south-west), Goathill (2 miles south) and Purse Caundle (2 miles south-east). Further out, we also cover Gillingham (9 miles north-east), Shaftesbury (13 miles east), Sherborne (3 miles south-west), Peacemarsh (9 miles north-east), Sturminster Newton (8 miles south-east) and Stalbridge (5 miles east).
Landmarks near Milborne Wick
Our customers here include homes close to The Gryphon School, Milborne Port Primary School and Milborne Wick Mission Church and the streets around them. The nearest railway station is Templecombe station, roughly 2.8 miles north-east. Further afield, we also cover the area around Sherborne Old Castle (2.6 miles south-west) and Sherborne Steam & Waterwheel Centre (2.6 miles south-west).
Should you replace it?
Replacing a tray normally involves removing the screen and tiling, preparing a new base and tiling again. A repair or resurface leaves all of that alone. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Milborne Wick customers choose us
- Straight answers about what a repair can do
- Work done at your home or business
- Fixed prices from your pictures
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page.
What we are called out for in Milborne Wick
On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On solid floors, cracks normally point to an uneven base.
Signs it’s time to call us include:
- Scratches in the surface
- Chips on the edges
- A tray that creaks or moves underfoot
- A tray that looks tired however much you clean it
Questions to ask before booking
- How changes to the job are handled
- How long it needs to cure
- What aftercare is recommended
- What preparation is included
How it works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes a few hours, or most of a day for a full resurface, and you can get on with other things while we are there.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- We refinish the surface to match the tray.
- We tidy up and tell you when you can shower.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Clean with washing-up liquid and a soft cloth
- Use the extractor fan
- Store bottles off the tray
- Give the tray a quick rinse after use
Keep an eye on the sealant, and replace it when it splits or goes black.
A tray that moves underfoot needs looking at, before it cracks or gets worse.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Materials and what they mean for the repair
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.
Nearby places to Milborne Wick
Other services in Milborne Wick
Your questions about shower tray repair in Milborne Wick
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you make an old tray look new?
Yes. The whole tray can be resurfaced.
Do you reseal the tray as well?
Yes. Add it to your quote and we’ll do both on one visit.
How long does it take to cure?
You will get the exact time when we finish.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can you fix a cracked tray?
Generally, as long as it doesn’t flex. We reinforce the crack, fill it and refinish the surface.
About our accreditations · Every repair comes with a one-year guarantee.
