Dorset · England
Shower Tray Repair in Milborne Port
Damaged shower tray in Milborne Port? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Scuffs and light scratches
- A dull, stained or worn surface
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Avoid strong descalers and bleach
- Rinse away soap after showering
- Reseal when the silicone splits or turns black
- Ventilate the room after showers
Keep an eye on the sealant, and reseal when it starts to fail.
Stop using the shower if the tray is cracked. Water can get through to the floor and walls, where it causes damage you can’t see.
About our shower tray repair in Milborne Port
We check the tray before repairing it: a tray that moves needs its support sorted first, or the crack will come back. We will explain what we find. Whether it’s a damaged area around the waste and staining and dullness across the tray, we can help, on ceramic, acrylic and enamelled steel alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Milborne Port (DT9)
- County
- Dorset
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours, or most of a day for a full resurface. Before leaving, we tell you how long to leave it and how to look after it.
- First we check the tray is solid and work out why any crack happened.
- Next we clean and prepare the tray.
- Chips and cracks are filled, reinforced and sanded level.
- The repair is colour-matched, or the entire tray gets a new finish.
- Once cured, normally by the following day, you can use the shower.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Let us know about parking or access
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Do you need shower tray repair in Milborne Port?
The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.
Look out for these signs:
- Movement when you stand on it
- Snagging damage in a new bathroom
- A cracked shower tray
- Chips or cracks by the plughole
Before booking anyone
- What happens if they find more damage
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
For landlords and businesses
If you manage property in Milborne Port, we will quote for several properties at once. Send pictures for each one and we will price them together.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Our work in Milborne Port
Milborne Port is about 8 miles east of Yeovil, in Dorset. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We work in 462 places across Dorset, from the larger towns to small villages.
We work across DT9. From High Street, Station Road and London Road or anywhere nearby, a technician can come to you. We also cover the places around Milborne Port: Goathill (1 mile south), Milborne Wick (1 mile north-west), Oborne (1 mile west), Henstridge Bowden (1 mile north-east) and Purse Caundle (1 mile south-east). Within a short drive, we also cover Blandford Forum (15 miles south-east), Gillingham (9 miles north-east), Shaftesbury (12 miles east), Sherborne (3 miles south-west), Peacemarsh (10 miles north-east) and Sturminster Newton (8 miles east).
Near you in Milborne Port
Around Milborne Port, we work in homes near Tippling Philosopher pub, Church of St John the Evangelist and The Gryphon School and the streets around them. The nearest railway station is Sherborne station, roughly 2.7 miles south-west. A little further out are Sherborne Old Castle (2.1 miles south-west) and Sherborne Steam & Waterwheel Centre (2.2 miles south-west).
Also near Milborne Port
What else we do in Milborne Port
What affects the price in Milborne Port
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Where the damage is and how we get to it
Our prices are the same across the UK, so there is no premium for Milborne Port. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A photo taken from further back
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in Milborne Port, and we will come back with a fixed quote.
Your questions about shower tray repair in Milborne Port
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Are there extra charges for Milborne Port?
There is no separate call-out charge. The fixed quote covers the visit and the work.
When can I use the shower again?
You’ll get the exact time when we finish.
Do you work in Milborne Port?
We do. Repair technicians travel to Milborne Port from across the region, and the price is the same as everywhere else.
Should you replace it?
Replacing a tray typically means refitting the screen, retiling and resealing. Repairing it avoids all of that. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Milborne Port
- Fixed prices from your photos
- We will tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- No extra charge for your area
See our full price list.
What your shower tray is made of matters
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips are filled and matched to the surface.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
