Hampshire · England
Shower Tray Repair in Milford on Sea
Shower tray chip, crack and scratch repairs and resurfacing in Milford on Sea, carried out at your home and guaranteed for a year.
- Repairs from £95
- Movement when you stand on it
- Cracks running from the waste
Common problems we fix in Milford on Sea
Rigid trays don’t bend, they crack when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.
Send us a picture if you notice any of these:
- Chips caused during fitting
- A cracked shower tray
- Chips on the edges
- Chips or cracks by the plughole
Comparing quotes
- How changes to the job are handled
- How to care for the finish
- If travel is included in the price
- Whether the price is fixed and includes VAT
Shower tray repair in Milford on Sea without replacing anything
A worn or stained tray can be resurfaced, for a clean, uniform finish. Whether it’s scuffs and light scratches and a tray that creaks or moves underfoot, we can help, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Milford on Sea (SO41)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Milford on Sea
Repairs from £95. We charge the same across the UK, including Milford on Sea. The price reflects:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How hard the colour is to match
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole shower tray
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Your questions about shower tray repair in Milford on Sea
Is it OK to use a cracked tray?
We’d stop using it until it’s repaired, because water may be getting underneath.
How long before I can shower?
Normally by the following day. We’ll confirm before we leave.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. You’re under no obligation.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you cover the whole of Hampshire?
Across the UK, and that includes Milford on Sea. Our prices are the same everywhere.
Can you fix a cracked tray?
Usually, as long as it doesn’t flex. The crack is reinforced, filled and refinished.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Do the materials smell?
There may be a mild smell during the work.
About Milford on Sea
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover all 683 towns and villages across Hampshire.
We work across SO41. Local streets include High Street, Love Lane and Greenbanks Close, and we cover them all. We also cover the places around Milford on Sea: Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). We also work in nearby towns such as Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
What’s near Milford on Sea
Our clients here include homes close to Priestlands School, The Red Lion Public House and Church of All Saints and the streets around them. For rail, the closest station is Lymington Town station, roughly 3.4 miles north-east of the centre. A little further out are Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). The countryside around Milford on Sea includes Milford on Sea LNR and Tennyson Down.
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Damage below the tray that needs a builder
- Trays cracked in several places
- Leaks from the waste or pipework (a plumber’s job)
Send us photos and we will tell you honestly.
What we work on
- Ceramic
- Enamelled steel
- Acrylic
- Stone resin
- Cast iron
Repair or replace in Milford on Sea?
When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Milford on Sea
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- Normally one visit, start to finish
- Nothing taken out or refitted
See our full price list.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Repairs by material
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips can be filled and matched.
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Landlords, agents and businesses in Milford on Sea
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Places near Milford on Sea
Also in Milford on Sea
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, or most of a day for a full resurface. Before leaving, we tell you how long to leave it and how to care for it.
- We make sure the tray does not flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and strengthen any chips or cracks and sand them smooth.
- The repair is colour matched, or the whole tray gets a new finish.
- Once cured, normally by the next day, you can use the shower.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will say immediately whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
