Wiltshire · England
Shower tray repair & resurfacing in Milford, Wiltshire
Our repair technicians come to Milford for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A tray that creaks or moves underfoot
- Cracks running from the waste
Different materials, different repairs
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and we match repairs to the surface finish.
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.
Shower tray repair at your home in Milford
The first thing we do is check the tray: a tray that moves needs its support sorted first, otherwise any crack returns. We will explain what we find. If you’re dealing with cracks running from the waste and a tray that looks tired however much you clean it, we can help.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Milford (SP1, SP2, SP5)
- County
- Wiltshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
When to call us in Milford
Stone resin trays are rigid, so they crack rather than bend if the floor beneath them isn’t flat and fully supported. Movement in a timber floor has the same effect.
Typical reasons for a call-out include:
- A cracked shower tray
- Edge chips from dropped bottles
- Scratches in the surface
- A dull, stained or worn surface
Comparing quotes
- Aftercare advice
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- When it can be used again
Other services in Milford
Your questions about shower tray repair in Milford
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How do I book?
Photos of the damage, a photo of the whole shower tray and your postcode. Then we will agree a date.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
How long does it take to cure?
You’ll get the exact time when we finish.
Do you work in Milford?
Yes. We work across the UK and come to Milford and the rest of Wiltshire. Send pictures and we will quote, or call 0345 017 0787.
How do I get a price for shower tray repair in Milford?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
About Milford
Milford is about 1 mile south-east of Salisbury, in Wiltshire. We travel to homes and businesses in Milford and the surrounding area, so there is no workshop to go to. Milford is one of 425 places in Wiltshire we cover. Our jobs stretch from Milford to London (79 miles away).
Jobs in SP1, SP2 and SP5 work the same way as everywhere else we cover. Streets in the area include Cow Lane, Salt Lane and The Avenue, and we cover them all. We also cover the places around Milford: Bugmore (1 mile south-west), Laverstock (1 mile north-east), Salisbury (1 mile north-west), Harnham (1 mile south-west) and Britford (1 mile south). Larger places within reach include Amesbury (7 miles north), Old Sarum (3 miles north), Bulford (9 miles north), Wilton (4 miles west), Tisbury (13 miles west) and Durrington (9 miles north).
What’s near Milford
Locally, our jobs take us to homes close to Bishop Wordsworth's Church of England Grammar School, Salisbury Sixth Form College and Corn Exchange. Also close by are Church of St Martin (less than half a mile south-west), St Martin's CofE Voluntary Aided Primary School (under half a mile north-west) and The Railway Inn/The Dust Hole (within half a mile south-west). Milford’s nearest station is Salisbury station, about 1 mile west of the centre. Other landmarks nearby include Harvard Hospital (1.2 miles south-west) and Clarendon Palace (1.8 miles east). For a walk, there is Harnham Hill.
- Other local spots include Salisbury (0.6 miles west)
Repair or replace in Milford?
A new shower tray generally means taking out the enclosure and tiles, relaying the base and re-tiling. A repair or resurface leaves all of that alone. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why book with us
- No need to remove anything
- Dust sheets down, tidy finish
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page.
What affects the price in Milford
Prices start from £95. We price every job individually. What matters most is:
- The type of damage
- Whether we combine several jobs
- How much damage there is
- Any earlier repairs that need removing first
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- A close-up of the damage, in focus
- Natural light rather than flash
- One picture of the whole shower tray
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Keeping it looking good
So the finish stays in good condition for years:
- Stick to gentle cleaners
- Avoid strong descalers and bleach
- Rinse the tray after each shower
- Do not stand heavy bottles on the tray
Store heavy bottles on a shelf, not on the tray, so they can’t be knocked over.
Stop using the shower if the tray is cracked. Water can get through to the floor and walls, where it causes damage you can’t see.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Multiple cracks across the tray
- Damage below the tray that needs a builder
- Movement caused by a poor base, until the support is fixed
Send us photos and we will tell you honestly before booking.
What we work on
- Stone resin
- Cast iron
- Ceramic
- Enamelled steel
- Acrylic
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, or most of the day to resurface the whole tray. We tidy up before we leave and tell you when it’s ready to use.
- We ensure the tray doesn’t flex and look for the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- We leave it to cure; the shower is usually usable the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
