Wiltshire · England
Shower Tray Repair in Shute End
Shower tray repair across Shute End and nearby, done in a single visit in most cases.
- Repairs from £95
- Chips or cracks by the plughole
- Edge chips from dropped bottles

About our shower tray repair in Shute End
Stone resin, acrylic and ceramic trays can all be repaired, or resurface the whole tray if it’s worn. The tray stays in place, so the enclosure and tiles aren’t disturbed. Whether it’s a dull, stained or worn surface and a tray that flexes, we can help.
Every repair comes with our one-year guarantee, wherever you are in Wiltshire.
- Location
- Shute End (SP5)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Shute End use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
How we price shower tray repair
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- The material and finish
- Where the damage is and how we get to it
- What kind of damage it is
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A coin beside the damage so we can judge size
Send us a picture of the damage and one of the entire item, with your SP5 postcode, and we’ll reply with a fixed price.
Shute End and the surrounding area
Shute End is about 3 miles south-east of Salisbury, in Wiltshire. Jobs in Shute End are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We work in all 425 towns and villages in Wiltshire. Our jobs stretch from Shute End to London (about 78 miles away).
All of SP5 is within our area, from the main roads to the quietest streets. Close by, we cover Britford (1 mile west), Alderbury (1 mile south-east), Whaddon (2 miles south-east), Nunton (2 miles south-west) and Milford (2 miles north-west). Within a short drive, we also cover Salisbury (3 miles north-west), Amesbury (8 miles north), Old Sarum (4 miles north), Bulford (10 miles north), Bemerton (3 miles north-west) and Wilton (5 miles north-west).
Landmarks near Shute End
Locally, our jobs take us to homes close to Church of St Mary, Bishop Wordsworth's Church of England Grammar School and Longford CofE (VC) Primary School, among other places. For rail, the closest station is Salisbury station, about 2.7 miles north-west. Nearby you’ll also find Young Gallery (2.3 miles north-west) and Clarendon Palace (1.5 miles north). The countryside around Shute End includes Harnham Hill.
- Other local spots include Salisbury (2.3 miles north-west)
Other services in Shute End
Common problems we fix in Shute End
The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.
Send us a picture if you notice any of these:
- Chips or cracks by the plughole
- A tray that creaks or moves underfoot
- A crack across the base
- Chips caused during fitting
Before booking anyone
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- What prep work is covered
- Whether they match the colour on site
Repairing versus replacing in Shute End
If the tray is solid and the crack hasn’t let water spread, repair is usually best. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Shute End customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the entire UK
- No need to remove anything
- Most jobs done in one visit
See our prices page.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- A tray that moves underfoot
- Damage below the tray that needs a builder
- A tray broken in more than one place
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Shute End
- Cast iron
- Enamelled steel
- Ceramic
- Stone resin
- Acrylic
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours, or most of a day for a full resurface. Before leaving, we tell you when it can be used and how to care for it.
- We check the tray is firmly supported and find the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- The repair is colour matched, or the entire tray gets a new finish.
- We leave it to cure; the shower is generally usable the next day.
Before we arrive
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
Ask for a price
Most customers in Shute End get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Shute End questions
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you quote from photos?
Nearly always. If pictures do not show enough, we will ask for another angle.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How much does shower tray repair cost in Shute End?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Use the extractor fan
- Keep heavy bottles on a shelf
- Clean with washing-up liquid and a soft cloth
- Don’t ignore a tray that flexes
Keep an eye on the sealant, and replace it when it splits or goes black.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
About our accreditations · Every repair comes with a one-year guarantee.

