Greater London · England
Shower tray repair & resurfacing in Millbank, Greater London
Shower tray repair for Millbank, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Scratches from cleaning or grit
- A damaged area around the waste
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How we handle shower tray repair in Millbank
A worn or stained tray can be resurfaced, giving it a fresh, even finish. We work on enamelled steel, acrylic and stone resin, and common reasons people contact us are a tray that creaks or moves underfoot and chips or cracks by the plughole.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Millbank (SW1P, W1J, SW1V)
- Area hub
- Greater London
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need shower tray repair in Millbank?
Rigid trays do not bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
You may need us if you’ve spotted any of these:
- A tray that looks tired however much you clean it
- A tray that creaks or moves underfoot
- Chips on the edges
- A damaged area around the waste
What to look for in a quote
- What the guarantee covers, and for how long
- When it can be used again
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
Landlord and trade work in Millbank
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Places near Millbank
What else we do in Millbank
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- Damage below the tray that needs a builder
- Multiple cracks across the tray
- Leaking waste fittings
If in doubt, send photos and we’ll say what we think.
Materials we work on in Millbank
- Acrylic
- Stone resin
- Ceramic
- Cast iron
- Enamelled steel
Millbank and the surrounding area
Millbank is about 1 mile south-east of City of Westminster, in Greater London. Anywhere in SW1P, we come to you. Millbank is one of 764 places in Greater London where we work.
We work across the SW1P, W1J and SW1V postcode area. Whether you live on Eaton Lane, Wilton Road and Castle Lane or anywhere nearby, a technician can come to you. Millbank is on the A4 and A202, so it’s easy for us to reach. Other places close to Millbank include Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). We also work in nearby towns such as Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Around Millbank
Typical jobs here are in homes near Harris Westminster Sixth Form, St Matthew's School and Grafton Arms and the streets around them. You will also find London Library (0.6 miles north), Christ Church (within half a mile south-west), Blewcoat School (within half a mile south-west) and St James's Park (within half a mile north). Millbank’s nearest station is London Victoria station, roughly 0.6 miles south-west. A little further out are Kingly Court (0.9 miles north) and Westminster St Margaret and St John (less than half a mile north). For a walk, there’s St. James's Park Lake and Ludgate Hill.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Rinse away soap after showering
- Keep the bathroom well ventilated
- Clean with washing-up liquid and a soft cloth
- Replace failing sealant promptly
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.
Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, or most of the day to resurface the whole tray. If anything looks different from your photos, we’ll talk to you before going ahead.
- The surrounding area is sheeted and masked.
- Old sealant is removed if it’s in the way.
- The tray is cleaned, keyed and repaired.
- The surface is refinished to match.
- We clean up and give you the curing time.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Read more
Repair or replace in Millbank?
A new shower tray frequently means a new enclosure fitting, new tiling and new sealant. A repair leaves all of that untouched. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Millbank customers choose us
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- One visit for most repairs
Take a look at our pricing.
Millbank questions
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover Millbank?
We do. Technicians travel to Millbank from across the region, with no extra charge for travel.
When can I use the shower again?
We will give you the curing time on the day.
Are there extra charges for Millbank?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
How do I get a price for shower tray repair in Millbank?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What affects the price in Millbank
Prices start from £95. Every quote is fixed and free. What we take into account:
- How much damage there is
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The material and finish
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Details of any past repairs
- One sharp close-up of the damage
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
