Greater London · England
Bath re-enamelling & resurfacing in Millbank, Greater London
Bath re-enamelling across Millbank and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Bath re-enamelling in Millbank, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a coating lifting around the plughole and an original cast iron bath that needs restoring, we can help, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Where
- Millbank (SW1P, W1J, SW1V)
- County
- Greater London
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Millbank
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
Questions to ask before booking
- What protection goes down before work starts
- How to care for the finish
- What happens if they find more damage
- How the colour is matched
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Millbank clients choose us
- Fixed prices from your pictures
- Colour-matched on site
- Honest advice, even when it means no job
- One visit for most repairs
Take a look at our full price list or bath cost comparison.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Places near Millbank
Also in Millbank
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Whether we combine several jobs
- How many areas need work
- Access to the area
- The material and finish
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Any details about the material
- A picture taken from further back
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow the best part of a day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Millbank and nearby
Millbank is about 1 mile south-east of City of Westminster, in Greater London. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover all 764 towns and villages across Greater London.
Our technicians cover all of SW1P, W1J and SW1V. We regularly work on streets such as Eaton Lane, Wilton Road and Castle Lane. Being close to the A4 and A202, Millbank is simple for us to get to. We also cover the places around Millbank: Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). We also work in nearby towns such as Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Around Millbank
Our clients here include homes close to Harris Westminster Sixth Form, St Matthew's School and Grafton Arms. Nearby too are London Library (0.6 miles north), Christ Church (under half a mile south-west), Blewcoat School (within half a mile south-west) and St James's Park (under half a mile north). The nearest railway station is London Victoria station, about 0.6 miles south-west of the centre. A little further out are Kingly Court (0.9 miles north) and Westminster St Margaret and St John (less than half a mile north). Open spaces near Millbank include St. James's Park Lake and Ludgate Hill.
Millbank questions
Which areas do you work in?
Everywhere in the UK, Millbank included. Travel is included in the price.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How do I get a price for bath re-enamelling in Millbank?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your SW1P postcode.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
About our accreditations · Every repair comes with a one-year guarantee.
