Somerset · England

Shower Tray Repair for Milverton homes

Damaged shower tray in Milverton? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Damage around the waste
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Milverton

Shower tray repair at your home in Milverton

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. We match the colour and finish. Typical jobs include chips on the edges and movement when you stand on it, on ceramic, cast iron and acrylic.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Location
Milverton (TA4)
Area hub
Somerset
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What happens on the day

We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours for a repair, longer for a full resurface, and we leave the room as we found it.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, generally until the following day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access
  • Let us know which floor the room is on

Getting a price

For a price in Milverton, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

What shower tray repair costs

Prices start from £95. Every quote is fixed and free. What we look at:

  • Unusual colours or finishes
  • The type of damage
  • Whether old repairs or coatings need taking off
  • What the surface is made of

Our prices are the same across the UK, so there’s no premium for Milverton. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your pictures

Photographing the damage takes a minute. Try to send:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • A photo taken from further back

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Should you replace it?

Replacing a tray typically means refitting the screen, retiling and resealing. A repair leaves all of that untouched, at a fraction of the cost. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why Milverton customers choose us

  • We come to you, anywhere in the UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted
  • Free fixed quotes from pictures

Read our prices page.

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

When we’d advise against a repair

To be straight with you, there are a few things a repair won’t fix:

  • Movement caused by a poor base, until the support is fixed
  • Leaks from the waste or pipework (a plumber’s job)
  • Water damage to the floor beneath the tray

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Enamelled steel
  • Acrylic
  • Stone resin
  • Cast iron
  • Ceramic

Do you need shower tray repair in Milverton?

Dull and stained trays are generally down to cleaning: abrasive pads, strong chemicals and limescale wear the finish away.

People typically call us after spotting one of these:

  • Staining and dullness across the tray
  • Snagging damage in a new bathroom
  • Damage around the waste
  • Edge chips from dropped bottles

Comparing quotes

  • How changes to the job are handled
  • What preparation is included
  • Is the price fixed, and does it include VAT?
  • Who will actually do the work

How to compare quotes

Milverton: your questions answered

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

Do you work in Milverton?

Yes, we do. We send a technician to Milverton for every job, and the price is the same as everywhere else.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can a stained tray be refinished?

Yes, it’s a common job. A full resurface makes a tired tray look fresh.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Is there a guarantee?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

About Milverton

Milverton is about 3 miles north of Wellington, in Somerset. Our technicians come to homes and businesses in Milverton and nearby villages, so there is no workshop to go to. Milverton is one of 640 towns and villages in Somerset we cover.

Jobs in TA4 are booked in the same way as anywhere else. We regularly work on streets such as High Street, Station Road and Parsonage Lane and the roads around them. Close by, we cover Chipley (1 mile south), Fitzhead (2 miles north), Hillcommon (2 miles east), Oake (2 miles east) and Nynehead (2 miles south-east). Further out, we also cover Taunton (7 miles east), Bridgwater (13 miles north-east), Wellington (3 miles south), Sydenham (14 miles north-east), Wilton (6 miles east) and Comeytrowe (5 miles east).

What’s near Milverton

Locally, our jobs take us to homes close to The Globe Inn, Milverton Community Primary School and Pre-School and Church of St Michael, among other places. Well-known places in the area include Merrifield Children's Unit (3 miles east) and Blazes (3.6 miles north-east). Green spaces nearby include Knowle Hill.

Map of Milverton © OpenStreetMap contributors

How to look after the repair

How the surface is treated afterwards matters:

  • Keep harsh chemicals off the tray
  • Rinse away soap after showering
  • Do not ignore a tray that flexes
  • Replace failing sealant promptly

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.