Somerset · England

Shower tray repair & resurfacing in Hillcommon, Somerset

Shower tray repair in Hillcommon without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Movement when you stand on it
  • Snagging damage in a new bathroom
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Hillcommon?

Shower tray repair in Hillcommon, done in place

We repair a lot of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. Typical jobs include a dull, stained or worn surface and chipped corners or rims, across stone resin, acrylic and ceramic.

A one-year guarantee comes as standard, so you’re covered after the visit.

Where
Hillcommon (TA4)
Area hub
Somerset
Cover
One year on every repair
Quote
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Where we work around Hillcommon

Hillcommon is about 3 miles north of Wellington, in Somerset. Jobs in Hillcommon are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Hillcommon is one of 640 places in Somerset we cover.

Here we cover the TA4 postcode area. Neighbouring places we cover include Oake (1 mile south-east), Milverton (2 miles west), Nynehead (2 miles south), Ash Priors (2 miles north) and Fitzhead (2 miles north-west). Larger places within reach include Taunton (5 miles east), Bridgwater (12 miles north-east), Chard (15 miles south-east), Wellington (3 miles south), Sydenham (12 miles north-east) and Wilton (5 miles east).

What’s near Hillcommon

Typical jobs here are in homes near Church of St Bartholomew, Oake and The Royal Oak pub and the streets around them. The nearest railway station is Taunton station, about 4.9 miles east of the centre. Well-known places in the area include Merrifield Children's Unit (1.4 miles north-east) and Taunton Castle (4.5 miles east). Open spaces near Hillcommon include Knowle Hill.

Map of Hillcommon © OpenStreetMap contributors

Should you replace it?

Replacing a tray usually means refitting the screen, retiling and resealing. Repairing it avoids all of that. Our shower tray repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Hillcommon customers choose us

  • Dust sheets down, tidy finish
  • Fixed prices from your photos
  • Accredited with CHAS, Constructionline and SafeContractor
  • Colours mixed by hand to suit your surface

See our pricing.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Prices and what affects them

Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Quotes from your pictures

Before you send photos, a few simple things make all the difference:

  • A photo taken from further back
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly work with letting and managing agents. Send the address, photos and access details.

Common questions in Hillcommon

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Do you work in Hillcommon?

Yes, we do. Repair technicians travel to Hillcommon from across the region, and the price is the same as everywhere else.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

What areas do you cover?

The whole UK, including all of Somerset. Send your postcode with your pictures and we’ll offer you dates.

What information do you need?

Photos of the damage, a picture of the whole shower tray and your postcode. Then we’ll agree a date.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Common problems we fix in Hillcommon

A tired-looking tray is frequently the result of years of cleaning: limescale, harsh chemicals and abrasive pads strip the surface finish.

Customers generally contact us about:

  • Damage from a refit or building work
  • Scratches in the surface
  • A tray that looks tired however much you clean it
  • A tray that flexes

What your quote should include

  • Whether a trained technician does the job
  • When it can be used again
  • Whether the price covers travel
  • What happens if the damage is worse than the photos show

10 questions to ask before booking

How the visit works

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, or most of a day for a full resurface, including clearing up.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. We refinish the surface to match the tray.
  5. We clean up and give you the curing time.

Getting ready for the visit

  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat
  • Let us know if it has been repaired before

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Send pictures for a quote

Read more

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Honest limits

A repair isn’t right for every job, for example:

  • Multiple cracks across the tray
  • A tray that moves underfoot
  • Leaking waste fittings

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Hillcommon

  • Enamelled steel
  • Ceramic
  • Cast iron
  • Stone resin
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.