Somerset · England
Shower Tray Repair in Oake
Damaged shower tray in Oake? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A tray that flexes
- Chips on the edges
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking waste fittings
- Rotten or damaged flooring underneath
- A tray that flexes because it was never properly supported
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Oake
- Enamelled steel
- Acrylic
- Stone resin
- Ceramic
- Cast iron
How we handle shower tray repair in Oake
Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. Whether it’s chipped corners or rims and a tray that looks tired however much you clean it, we can help, on cast iron, ceramic and acrylic alike.
A one-year guarantee comes as standard.
- Area
- Oake (TA4)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Oake and nearby
Oake is about 3 miles north of Wellington, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 640 towns and villages in Somerset.
Every address in TA4 is within our area. You will find streets such as Saxon Close and Oake Acres, and we cover them all. We also cover the places around Oake: Hillcommon (1 mile north-west), Nynehead (2 miles south), Milverton (2 miles west), Ash Priors (2 miles north) and Fitzhead (3 miles north-west). Within a short drive, we also cover Taunton (5 miles east), Bridgwater (11 miles north-east), Chard (15 miles south-east), Wellington (3 miles south), Sydenham (12 miles north-east) and Wilton (4 miles east).
Near you in Oake
Around Oake, we work in homes near Church of St Bartholomew, The Royal Oak pub and Oake and the streets around them. The nearest railway station is Taunton station, about 4.6 miles east of the centre. Nearby you will also find Taunton Castle (4.1 miles east) and Blazes (3 miles north). For a walk, there is Knowle Hill.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Places near Oake
Also in Oake
Your questions about shower tray repair in Oake
Is a cracked tray repairable?
Frequently. If the tray moves, the support needs fixing first.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is a cracked shower tray safe to use?
It’s best to stop using it until it’s checked, in case water is getting through.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you make an old tray look new?
Yes. The whole tray can be resurfaced without removing it.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours, or most of the day to resurface the whole tray from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- We reinforce any crack and fill the damage.
- The repair is shaped, colour matched and finished.
- We leave it to cure, normally until the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Repairs by material
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so early repairs help.
What shower tray repair costs
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- How easy the damage is to reach
- Unusual colours or finishes
- What kind of damage it is
- How many areas need work
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Use the extractor fan
- Store bottles off the tray
- Keep harsh chemicals off the tray
- Give the tray a quick rinse after use
Give the repair its full curing time before showering. After that, gentle cleaning and good ventilation keep it in good shape.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.
Signs you need shower tray repair in Oake
Most cracked trays are trays that flex: without a solid, level base underneath, it flexes each time someone stands on it. Chips usually come from dropped bottles.
These are the problems we are asked about most:
- A tray that looks tired however much you clean it
- Damage from a refit or building work
- Damage around the waste
- Chips on the edges
Questions to ask before you book
- How changes to the job are handled
- If travel is included in the price
- Whether cleaning and preparation are in the price
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
