Lancashire · England

Shower Tray Repair for Myerscough homes

Problem with your shower tray in Myerscough? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Chips caused during fitting
  • A tray that flexes
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Myerscough?

How we price shower tray repair

Repairs from £95. We don’t charge extra for travel to Myerscough. The price comes down to:

  • How easy the damage is to reach
  • The colour and finish to match
  • The material
  • How many items we do on one visit

Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Natural light rather than flash

For a price in Myerscough, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Shower tray repair in Myerscough, done in place

You don’t always need a new tray. If it’s solid underneath, it can usually be repaired in place, which is far less work than a replacement. We work on acrylic, ceramic and stone resin, and common reasons people contact us are a damaged area around the waste and snagging damage in a new bathroom.

Every repair comes with our one-year guarantee.

Before and after: an old shower tray refinished by Surface Doctor
Where
Myerscough (PR3)
County
Lancashire
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

What we cannot put right

A repair is not always the answer, and we will tell you before we start. Repairs will not solve:

  • Leaking waste fittings
  • A tray broken in more than one place
  • Movement caused by a poor base, until the support is fixed

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Enamelled steel
  • Stone resin
  • Cast iron
  • Ceramic
  • Acrylic

About Myerscough

Myerscough is about 5 miles north of Fulwood, in Lancashire. From the centre of Myerscough to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Myerscough is one of 482 places in Lancashire where we work. You can also see our page for Liverpool, about 31 miles away.

Every address in PR3 is within our area, from the main roads to the quietest streets. Nearby, we also work in Bilsborrow (1 mile east), Cuddy Hill (1 mile south), Matshead (2 miles north-east), Catterall (2 miles north) and Stubbins (2 miles north). Further out, we also cover Preston (7 miles south-east), Lancaster (14 miles north), Chorley (15 miles south), Lytham St Anne's (12 miles south-west), Bamber Bridge (10 miles south-east) and Morecambe (15 miles north).

What’s near Myerscough

We visit homes around Bilsborrow John Cross Church of England Primary School, St Hilda's Church and Owd Nell's Tavern and the streets around them. A little further out are Church Cottage (3.9 miles south-east) and Greenhalgh Castle (3.3 miles north). For a walk, there’s Beacon Fell.

Map of Myerscough © OpenStreetMap contributors

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Rinse away soap after showering
  • Stick to gentle cleaners
  • Use the extractor fan
  • Check the seal every few months

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

Myerscough: your questions answered

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Do you come to Myerscough?

Yes. We cover the whole UK and travel to Myerscough. Send pictures and we’ll quote, or call 0345 017 0787.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Is it OK to use a cracked tray?

Only if you are sure it is not leaking. Look for damp or stains below.

Are there extra charges for Myerscough?

No. Our quotes include travel, with the same prices everywhere we work.

What we’re called out for in Myerscough

Rigid trays do not bend, they crack if the floor beneath them is not flat and fully supported. Timber floors that move can cause it too.

The most common problems we are called about are:

  • A tray that looks tired however much you clean it
  • A tray that flexes
  • A crack across the base
  • Scratches from cleaning or grit

What to look for in a quote

  • Whether a trained technician does the job
  • Whether the price is fixed and includes VAT
  • How to care for the finish
  • What the guarantee covers, and for how long

Choosing a repair company

Should you replace it?

The tray is normally the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. A repair keeps everything as it is. Prices start from £95. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why Myerscough customers choose us

  • Dust sheets down, tidy finish
  • Colour mixed on the day to match
  • Straight answers about what a repair can do
  • No need to remove anything

See our full price list.

What we do, step by step

We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow a few hours for a repair, longer for a full resurface.

  1. First we check the tray is solid and work out why any crack happened.
  2. We clean and prepare the damaged area or the entire tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour matched, or the entire tray gets a new finish.
  5. We leave it to cure; the shower is normally usable the day after.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Send photos for a quote

Related advice

Materials and what they mean for the repair

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips can be filled and matched.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.