Hertfordshire · England
Shower Tray Repair for Nash Mills homes
Our repair technicians come to Nash Mills for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A crack across the base
- A tray that creaks or moves underfoot
Shower tray repair in Nash Mills, done in place
Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched. We’re often asked to fix a crack across the base and a tray that flexes, on stone resin, enamelled steel and cast iron.
Every job is backed for twelve months in Nash Mills and everywhere else. We return to put right any problem with the work.
- Where
- Nash Mills (HP3, WD4)
- Area hub
- Hertfordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
A repair is not right for every job, including:
- A tray broken in more than one place
- Movement caused by a poor base, until the support is fixed
- Leaking waste fittings
Send us pictures and we will tell you honestly before booking.
What we work on
- Cast iron
- Ceramic
- Enamelled steel
- Stone resin
- Acrylic
Repair or replace in Nash Mills?
When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Our shower tray repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Nash Mills
- Colours mixed by hand to suit your surface
- No need to remove anything
- Free fixed quotes from pictures
- Every repair guaranteed for a year
Take a look at our prices page.
Questions from Nash Mills
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Materials and what they mean for the repair
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
How to care for the repair
So the finish stays in good condition for years:
- Replace failing sealant promptly
- Report any creaking or movement early
- Give the tray a quick rinse after use
- Keep harsh chemicals off the tray
Keep scourers and harsh chemicals off the tray. A soft cloth and washing-up liquid do the job.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, or most of a day for a full resurface, and we’ll tell you if anything changes.
- The surrounding area is sheeted and masked.
- Any sealant in the way is cut out.
- The tray is cleaned, keyed and repaired.
- We refinish the surface to match the tray.
- We clean up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Landlords, agents and businesses in Nash Mills
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What we’re called out for in Nash Mills
Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks typically point to an uneven base.
Most people get in touch after spotting something like this:
- A tray that looks tired however much you clean it
- Edge chips from dropped bottles
- Movement when you stand on it
- Damage around the waste
Questions to ask before booking
- How long it needs to cure
- The length of the guarantee and what it covers
- What protection goes down before work starts
- If travel is included in the price
Our work in Nash Mills
Nash Mills is about 2 miles south of Hemel Hempstead, in Hertfordshire. Our technicians come to customers in Nash Mills and the surrounding area, so there’s no workshop to go to. Our technicians cover 381 places across Hertfordshire, from the larger towns to small villages. You can also see our page for London, about 22 miles away.
We cover every part of HP3 and WD4 and the streets around it. Streets in the area include Pond Road, Rose Lane and Lower Road. Other places close to Nash Mills include Felden (1 mile west), Rucklers Lane (1 mile south-west), Bennetts End (1 mile north), Apsley (1 mile north-west) and Kings Langley (1 mile south). Larger places within reach include Watford (5 miles south-east), St Albans (5 miles east), Welwyn Garden City (12 miles north-east), Harpenden (7 miles north-east), Hatfield (10 miles east) and Borehamwood (9 miles south-east).
What’s near Nash Mills
Our clients here include homes close to Red Lion Public House, Nash Mills Church of England Primary School and Church of St Mary and the streets around them. Nash Mills’s nearest station is Apsley station, about 0.5 miles west. Other landmarks nearby include Hemel Hempstead Hospital (1.7 miles north-west). The countryside around Nash Mills includes Long Deans and Verulamium Lake.
How we price shower tray repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- What the surface is made of
- Any earlier repairs that need removing first
- Access to the area
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Quotes from your photos
You can normally get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Also near Nash Mills
Other services in Nash Mills
About our accreditations · Every repair comes with a one-year guarantee.
