North Somerset · England
Shower Tray Repair in Oldmixon
Our repair technicians come to Oldmixon for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips caused during fitting
- A damaged area around the waste
Shower tray repair in Oldmixon, done in place
The first thing we do is check the tray: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We will tell you if that is the case. Typical jobs include chips or cracks by the plughole and cracks running from the waste, on cast iron, enamelled steel and ceramic.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Where
- Oldmixon (BS24, BS23)
- Area hub
- North Somerset
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Movement caused by a poor base, until the support is fixed
- Rotten or damaged flooring underneath
- Leaking waste fittings
If in doubt, send pictures and we will say what we think.
Materials we repair
- Stone resin
- Cast iron
- Ceramic
- Enamelled steel
- Acrylic
Prices and what affects them
Repairs from £95. We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- Details of any past repairs
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Do you need shower tray repair in Oldmixon?
Cracks often start at the waste, where the tray is cut and the fitting is tightened.
People normally call us after spotting something like this:
- A cracked shower tray
- Edge chips from dropped bottles
- A tray that flexes
- Chips caused during fitting
Questions to ask before booking
- What preparation is included
- How soon you can use it again
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
Our work in Oldmixon
Oldmixon is about 2 miles south of Weston-super-Mare, in North Somerset. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We work in 86 places across North Somerset.
Postcode districts we cover here: BS24 and BS23. Local streets include Puma Road, Rydal Road and Byron Road, and we cover them all. If you’re just outside Oldmixon, we cover Uphill (1 mile west), Hutton (1 mile east), Purn (1 mile south), Bleadon (1 mile south) and Weston-super-Mare (2 miles north). Within a short drive, we also cover Portishead (13 miles north-east), Clevedon (9 miles north-east), Nailsea (11 miles north-east), Yatton (7 miles north-east), Port Marine (14 miles north-east) and Long Ashton (15 miles north-east). Being one of North Somerset’s larger places, Oldmixon is somewhere we visit often.
What’s near Oldmixon
Locally, our jobs take us to homes close to The Walnut Tree pub, Hans Price Academy and St Barnabas Mission Church, among other places. The nearest railway station is Weston-Super-Mare station, roughly 1.4 miles north-west. Nearby you will also find Locking Castle (2.1 miles north-east) and Weston General Hospital (0.8 miles south-west). The countryside around Oldmixon includes Worlebury Hill.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Keep harsh chemicals off the tray
- Ventilate the room after showers
- Do not stand heavy bottles on the tray
- Check the seal every few months
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can cause damage underneath.
What else we do in Oldmixon
Landlords, agents and businesses in Oldmixon
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
If you manage property in Oldmixon, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Different materials, different repairs
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips can be filled and matched.
Questions from Oldmixon
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can a cracked shower tray be repaired?
Typically, as long as it doesn’t flex. We reinforce the crack, fill it and refinish the surface.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Can a stained tray be refinished?
Yes. Resurfacing gives a worn tray an even, clean finish.
What happens on the day
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, or most of the day to resurface the whole tray, and the room is left clean and tidy.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We clean up and give you the curing time.
Preparing for the visit
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
- Make sure the area is dry
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
