Rutland · England

Shower tray repair & resurfacing in Pilton, Rutland

Shower tray repair in and around Pilton: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Scratches in the surface
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Pilton

About our shower tray repair in Pilton

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. We match the colour and finish so the repair blends in. Our technicians work on enamelled steel, acrylic and cast iron, and people most frequently call us about movement when you stand on it and chipped corners or rims.

Every repair is covered by our one-year guarantee.

Discoloured square shower tray restored with a new white finish
Where
Pilton (LE15)
County
Rutland
Guarantee
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

What we’re called out for in Pilton

The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.

Common reasons people in Pilton contact us are:

  • A dull, stained or worn surface
  • A crack across the base
  • Movement when you stand on it
  • Scratches from cleaning or grit

Comparing quotes

  • How changes to the job are handled
  • How your room will be protected
  • Whether cleaning and preparation are in the price
  • If travel is included in the price

Choosing a repair company

About Pilton

Pilton is about 5 miles south-east of Oakham, in Rutland. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in 47 places across Rutland, from the larger towns to small villages. Our jobs stretch from Pilton to Birmingham (about 53 miles away).

Here we cover the LE15 postcode area. From Church Lane and Pinfold Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Lyndon (1 mile north-west), North Luffenham (1 mile east), Wing (1 mile west), Edith Weston (2 miles north-east) and South Luffenham (2 miles east). We also work in nearby towns such as Oakham (5 miles north-west), Uppingham (4 miles south-west), Barleythorpe (6 miles north-west), Cottesmore (7 miles north), Langham (7 miles north-west) and Whissendine (9 miles north-west).

Local landmarks in Pilton

Locally, our jobs take us to homes close to Church of St Nicholas and the streets around them. Further afield, we also cover the area around Normanton Church Museum (2.4 miles north-east). Green spaces nearby include King's Hill.

Map of Pilton © OpenStreetMap contributors

Pilton questions

Do you work in Pilton?

Yes, we do. We send a technician to Pilton for every job, and the price is the same as everywhere else.

Can I get a quote without a visit?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Can you fix a cracked tray?

Often. A tray that moves needs its support sorting before the repair.

Will there be a smell?

Expect a mild smell while we’re working that clears as it cures.

Can a stained tray be refinished?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How long before I can shower?

Normally the next day. We will tell you the exact time when we finish.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a few hours, or most of the day to resurface the whole tray. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Have a window or extractor fan available
  • Ensure the area is dry

Ask for a price

Upload a picture of the damage and a wider shot of the whole item, with your LE15 postcode, and we will reply with a fixed price.

Get a free quote

Read more

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips are filled and matched to the surface.

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Clean with washing-up liquid and a soft cloth
  • Reseal when the silicone splits or turns black
  • Don’t ignore a tray that flexes
  • Ventilate the room after showers

Check the silicone around the tray every few months, and reseal when it starts to fail.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, where it causes damage you can’t see.

What shower tray repair costs

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • How much damage there is
  • The type of damage
  • Previous DIY repairs that have to come out

The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • Any details about the material
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • Daylight if possible, and no flash reflection

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Should you replace it?

Replacing a tray usually means removing the screen and tiling, relaying the base and tiling again. A repair or resurface leaves all of that alone. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why Pilton customers choose us

  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year
  • A fixed quote before booking

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.