Inverclyde · Scotland
Shower tray repair & resurfacing in Port Glasgow, Inverclyde
We travel to Port Glasgow for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A tray that flexes
- Snagging damage in a new bathroom
Shower tray repair in Port Glasgow, done in place
Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We are frequently asked to fix scratches from cleaning or grit and damage around the waste, on cast iron, enamelled steel and acrylic.
You get a one-year guarantee, the same in Port Glasgow as everywhere else we work.
- Location
- Port Glasgow (PA14, PA15)
- Area hub
- Inverclyde
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Port Glasgow
The tray is normally the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Prices start from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- We leave the room as we found it
- Every repair guaranteed for a year
- Most jobs done in one visit
- No extra charge for your area
See our prices page.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Avoid strong descalers and bleach
- Rinse the tray after each shower
- Report any creaking or movement early
- Stick to gentle cleaners
Keep an eye on the sealant, and reseal when it starts to fail.
Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below isn’t visible.
Honest limits
A repair is not right for every job, including:
- Leaking waste fittings
- Movement caused by a poor base, until the support is fixed
- Rotten or damaged flooring underneath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Ceramic
- Stone resin
- Enamelled steel
- Cast iron
- Acrylic
Prices and what affects them
Prices start from £95. We price every job individually, from your pictures. The main factors are:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Whether we combine several jobs
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Natural light rather than flash
- Details of any past repairs
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
What your shower tray is made of matters
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and the repair is polished to match the shine.
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base isn’t fully supported, and chips can be filled and matched.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Common questions in Port Glasgow
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you redo the sealant?
We can. It’s a good time to replace old sealant.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Our work in Port Glasgow
Port Glasgow is about 12 miles north-west of Paisley, in Inverclyde. Customers in Port Glasgow get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover 19 places across Inverclyde. Our jobs stretch from Port Glasgow to Glasgow (about 16 miles away).
We work across the PA14 and PA15 postcode area. From Stanton Square, Ardmore Road and Montgomerie Street or anywhere nearby, a technician can come to you. Being close to the A8 and A761, Port Glasgow is easy for our repair technicians to reach. We also cover the places around Port Glasgow: Mid Auchinleck (1 mile south-east), Bardrainney (1 mile south-east), Woodhall (1 mile east), Bogston (1 mile north-west) and Cardross (3 miles north). Larger places within reach include Greenock (4 miles west), Gourock (6 miles west), Kilmacolm (3 miles south-east), Braeside (6 miles west), Inverkip (7 miles west) and Branchton (5 miles west).
Around Port Glasgow
Typical jobs here are in homes near Clune Park Church and the streets around them. The closest station to Port Glasgow is Port Glasgow station, roughly 0.6 miles north-west. A little further out are Finlaystone House - Doll Collection (2.2 miles east) and Broadfield Hospital (1.3 miles east). The countryside around Port Glasgow includes Lyle Hill.
The process
Arrival times are agreed in advance. On site, it takes a few hours for a repair, longer for a full resurface for most jobs. The room is left tidy and you will know when it can be used.
- First, we check whether the tray moves.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- We leave it to cure, normally until the following day.
Before we arrive
- Make sure the area is dry
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Get a quote
For a price in Port Glasgow, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
What we’re called out for in Port Glasgow
Dull and stained trays are usually down to cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.
Send us a picture if you notice any of these:
- Staining and dullness across the tray
- A crack across the base
- Scuffs and light scratches
- Chips or cracks by the plughole
Questions to ask before you book
- What aftercare is recommended
- Whether the colour is mixed to match
- How the room is protected while they work
- When it can be used again
Nearby places to Port Glasgow
More services for Port Glasgow
About our accreditations · Every repair comes with a one-year guarantee.
