Cumbria · England

Shower Tray Repair for Raughton Head homes

Local shower tray repair for Raughton Head: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chipped corners or rims
  • Scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Raughton Head

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Shower tray repair in Raughton Head, done in place

Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. If you’re dealing with edge chips from dropped bottles and a tray that creaks or moves underfoot, we can normally put it right, on cast iron, enamelled steel and ceramic alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Raughton Head (CA5)
Area hub
Cumbria
Cover
12 months on all our work
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Looking after it afterwards

How the surface is treated afterwards matters:

  • Reseal when the silicone splits or turns black
  • Don’t stand heavy bottles on the tray
  • Do not use strong acids or bleach
  • Give the tray a quick rinse after use

Rinse the tray after use, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.

Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can cause damage underneath.

About Raughton Head

Raughton Head is about 6 miles south of Carlisle, in Cumbria. Whether you are in the middle of Raughton Head or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Raughton Head is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 54 miles away.

Our visits in CA5 are booked in the same way as anywhere else. Neighbouring places we cover include Buckabank (2 miles north), Dalston (3 miles north), Durdar (4 miles north-east), Blackwell (5 miles north) and Cummersdale (5 miles north). We also work in nearby towns such as Carlisle (6 miles north), Penrith (13 miles south-east), Currock (6 miles north), Raffles (6 miles north), Keswick (15 miles south-west) and Botcherby (6 miles north).

Local landmarks in Raughton Head

Our customers here include homes close to Church of All Saints and Raughton Head CofE School and the streets around them. The closest station to Raughton Head is Dalston (Cumbria) station, about 3.3 miles north. A little further out are High Head Castle (2 miles south-east).

Map of Raughton Head © OpenStreetMap contributors

Materials and what they mean for the repair

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Your questions about shower tray repair in Raughton Head

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Raughton Head.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

When a repair isn’t the answer

A repair is not always the answer, and we will tell you before we start. We cannot fix:

  • Movement caused by a poor base, until the support is fixed
  • A tray broken in more than one place
  • Damage below the tray that needs a builder

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Raughton Head

  • Cast iron
  • Acrylic
  • Enamelled steel
  • Stone resin
  • Ceramic

Repairing versus replacing in Raughton Head

Replacing a tray generally means refitting the screen, retiling and resealing. A repair leaves all of that untouched. Our shower tray repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job
  • Colour-matched on site

Take a look at our pricing.

Work for landlords and builders

We work for landlords, letting agents and housing providers in Raughton Head as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

How it works

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a few hours, or most of the day to resurface the whole tray. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, generally until the day after.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Move bottles, mats and clutter away from the area

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a free quote

Related advice

Common problems we fix in Raughton Head

Rigid trays don’t bend, they crack if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.

Send us a picture if you notice any of these:

  • A tray that creaks or moves underfoot
  • Chips on the edges
  • Scratches in the surface
  • Chips caused during fitting

Questions to ask before booking

  • What the guarantee covers, and for how long
  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • How changes to the job are handled

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.