North Yorkshire · England
Shower tray repair & resurfacing in Seamer, North Yorkshire
Damaged shower tray in Seamer? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A damaged area around the waste
- Snagging damage in a new bathroom
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A tray that flexes because it was never properly supported
- A tray broken in more than one place
- Plumbing leaks under the tray
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron
- Enamelled steel
- Ceramic
- Stone resin
- Acrylic
How we handle shower tray repair in Seamer
Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Common call-outs are for chips on the edges and a damaged area around the waste, on stone resin, cast iron and enamelled steel.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Seamer (YO12)
- Area hub
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we take into account:
- How many areas need work
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
We charge the same wherever you are, with no extra for Seamer. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A wider photo showing the whole shower tray
- A coin beside the damage so we can judge size
- The material, if you know it
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Also near Seamer
Other services in Seamer
Where we work around Seamer
Seamer is about 3 miles south-west of Scarborough, in North Yorkshire. Across the YO12 area, we carry out the work at your property. Our repair technicians cover 626 places across North Yorkshire. Our jobs stretch from Seamer to Leeds (about 54 miles away).
Our visits in YO12 are booked in the same way as anywhere else. We regularly work on streets such as Main Street, Denison Avenue and White Horse Lane and the roads around them. Neighbouring places we cover include Irton (1 mile north-west), Crossgates (1 mile east), East Ayton (2 miles north-west), Deep Dale (2 miles east) and West Ayton (2 miles west). We also work in nearby towns such as Scarborough (3 miles north-east), Filey (6 miles east), Pickering (14 miles west), Northstead (4 miles north), Newby (4 miles north) and Hunmanby (6 miles south-east).
Landmarks near Seamer
Locally, our jobs take us to homes close to Seamer and Irton Community Primary School, Mayfield Hotel and George Pindar School. Seamer’s nearest station is Seamer station, about 1 mile east of the centre. Nearby you will also find Scarborough Hospital (3 miles north) and Ayton Castle (2 miles north-west). For a walk, there is Oliver's Mount and Scarborough Mere.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Keep heavy bottles on a shelf
- Give the tray a quick rinse after use
- Ventilate the room after showers
- Reseal when the silicone splits or turns black
Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water cannot get underneath.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
Repairing versus replacing in Seamer
The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Our shower tray repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Colour-matched on site
- Most jobs done in one visit
- CHAS and Constructionline accredited
- No need to remove anything
See our full price list.
Repairs by material
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
Common problems we fix in Seamer
On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On concrete, an uneven base is the usual cause.
You may need us if you’ve spotted any of these:
- Movement when you stand on it
- Staining and dullness across the tray
- Scratches in the surface
- A damaged area around the waste
Comparing quotes
- What protection goes down before work starts
- Whether the colour is mixed to match
- What aftercare is recommended
- How long it needs to cure
Common questions in Seamer
Can you resurface a whole tray?
Yes. The whole tray can be resurfaced without removing it.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you reseal the tray as well?
Yes. We can repair and reseal on the same visit.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
When can I use the shower again?
Normally by the following day. We’ll confirm before we leave.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is it OK to use a cracked tray?
We’d stop using it until it’s repaired, in case water is getting through.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, or most of a day for a full resurface, and we finish with a tidy-up and a look at the finished work together.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
Preparing for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Get a quote
Most customers in Seamer get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Landlord and trade work in Seamer
We work for landlords, letting agents and housing providers in Seamer as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
