Devon · England

Shower tray repair & resurfacing in Sheepwash, Devon

Shower tray repair in Sheepwash without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • A tray that flexes
  • A cracked shower tray
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Sheepwash homes

How we handle shower tray repair in Sheepwash

A cracked or chipped shower tray doesn’t always need replacing. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. Typical jobs include snagging damage in a new bathroom and chips on the edges, in stone resin, ceramic and acrylic.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Where
Sheepwash (EX21)
Area hub
Devon
Guarantee
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Our work in Sheepwash

Sheepwash is about 13 miles south of Bideford, in Devon. Anywhere in EX21, we come to you. We work in all 586 towns and villages across Devon.

Jobs in EX21 are booked in the same way as anywhere else. From North Street, West Road and Lime Court or a nearby road, we can come to you. Other places close to Sheepwash include Highampton (1 mile south), Black Torrington (1 mile south-west), Ash Cross (2 miles north-east), Buckland Filleigh (2 miles north-west) and Petrockstowe (2 miles north-east). Within a short drive, we also cover Bideford (13 miles north), Okehampton (10 miles south-east), East-the-Water (13 miles north), Northam (14 miles north), Westward Ho! (14 miles north) and Great Torrington (8 miles north).

Landmarks near Sheepwash

Typical jobs here are in homes near Church of St Lawrence, Half Moon Inn and Highampton Community Primary School, among other places. Nearby you will also find Alscott Farm Museum (3.3 miles north-west).

Map of Sheepwash © OpenStreetMap contributors

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, or most of a day for a full resurface, and we finish by cleaning up and talking you through the result.

  1. First we check the tray is solid and work out why any crack happened.
  2. The damaged area, or the entire tray, is cleaned and prepared.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. We colour-match the repair, or spray a new finish across the entire tray.
  5. Once cured, usually by the day after, you can use the shower.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Read more

Aftercare tips

Good habits make a big difference to how long a repair lasts:

  • Clean with washing-up liquid and a soft cloth
  • Use the extractor fan
  • Get a moving tray checked
  • Check the seal every few months

Store heavy bottles on a shelf, not on the tray, to avoid chips.

Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.

What shower tray repair costs

Prices start from £95. Each job gets its own fixed price. This is what makes a difference:

  • How much damage there is
  • Where the damage is and how we get to it
  • The material
  • Whether it’s a chip, crack, burn or wear

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Getting a price from pictures

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • Any details about the material
  • Details of any past repairs

Upload pictures of the damage and a wider shot of the entire item, with your EX21 postcode, and we will come back with a fixed quote.

Your questions about shower tray repair in Sheepwash

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Are there extra charges for Sheepwash?

There is no separate call-out charge. The fixed price covers the visit and the work.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Honest limits

Some jobs are not right for a repair, for example:

  • Rotten or damaged flooring underneath
  • Movement caused by a poor base, until the support is fixed
  • Multiple cracks across the tray

Send us pictures and we will tell you honestly before booking.

What we work on

  • Enamelled steel
  • Ceramic
  • Acrylic
  • Cast iron
  • Stone resin

What we’re called out for in Sheepwash

Cracks often start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

Customers normally contact us about:

  • A damaged area around the waste
  • Cracks running from the waste
  • A tray that flexes
  • Staining and dullness across the tray

Questions to ask before booking

  • Is the price fixed, and does it include VAT?
  • What aftercare is recommended
  • Whether a trained technician does the job
  • The length of the guarantee and what it covers

Choosing a repair company

Landlord and trade work in Sheepwash

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Different materials, different repairs

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.