Devon · England
Shower tray repair & resurfacing in Sherford, Devon
Shower tray chip, crack and scratch repairs and resurfacing at your home in Sherford, with a one-year guarantee on every repair.
- Repairs from £95
- A tray that flexes
- Snagging damage in a new bathroom
About our shower tray repair in Sherford
A cracked or chipped shower tray does not always need replacing. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. We work on cast iron, stone resin and acrylic, and common reasons people get in touch are chips caused during fitting and scratches from cleaning or grit.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Sherford (TQ7)
- Area hub
- Devon
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing a tray generally means refitting the screen, retiling and resealing. Repairing it avoids all of that, at a fraction of the cost. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Colours mixed by hand to suit your surface
- No extra charge for your area
- A fixed quote before booking
- Rooms protected and left tidy
See our full price list.
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- How hard the colour is to match
- How much damage there is
- Doing more than one item at once
- How easy the damage is to reach
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To make it quick:
- Any earlier repairs or coatings
- The material, if you know it
- Daylight if possible, and no flash reflection
- A picture taken from further back
Email us photos of the damage and one of the whole item, and tell us you are in Sherford, and we will reply with a fixed price.
Sherford and nearby
Sherford is about 7 miles south-west of Dartmouth, in Devon. Customers in Sherford get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Sherford is one of 586 places in Devon where we work.
Our visits in TQ7 work the same way as everywhere else we cover. We also travel to Frogmore (1 mile south), West Charleton (2 miles south-west), Kingsbridge (3 miles west), West Alvington (3 miles west) and Higher Batson (4 miles south-west). Within a short drive, we also cover Ivybridge (12 miles north-west), Totnes (10 miles north), Dartmouth (7 miles north-east), Shiphay (15 miles north-east), Bridgetown (10 miles north) and Townstal (7 miles north-east).
Around Sherford
Around Sherford, we work in homes near Church of St Martin and the streets around them. Further afield, we also cover the area around Salcombe Castle (4.7 miles south-west) and South Hams Hospital (2.9 miles west). Green spaces nearby include Slapton Ley.
More services for Sherford
Looking after it afterwards
To keep it looking its best:
- Ventilate the room after showers
- Get a moving tray checked
- Give the tray a quick rinse after use
- Check the seal every few months
Keep an eye on the sealant, and replace it when it splits or goes black.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Do you need shower tray repair in Sherford?
The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.
People usually call us when they notice one of these:
- Movement when you stand on it
- Chips on the edges
- Chips caused during fitting
- A damaged area around the waste
Comparing quotes
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- How changes to the job are handled
- How long the guarantee is and what it covers
What we do, step by step
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- It’s left to cure, usually until the next day.
How to prepare
- Open a window if you can
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Materials and what they mean for the repair
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so early repairs help.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.
Sherford: your questions answered
Can I keep using a cracked tray?
It’s best to stop using it until it’s checked, in case water is getting through.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you resurface a whole tray?
Yes. The entire tray can be resurfaced without removing it.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- Plumbing leaks under the tray
- Water damage to the floor beneath the tray
- Movement caused by a poor base, until the support is fixed
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Cast iron
- Ceramic
- Acrylic
- Enamelled steel
- Stone resin
About our accreditations · Every repair comes with a one-year guarantee.
