North Somerset · England
Shower Tray Repair in Tickenham
Local shower tray repair for Tickenham: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks running from the waste
- Edge chips from dropped bottles
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Report any creaking or movement early
- Don’t use strong acids or bleach
- Ventilate the room after showers
- Give the tray a quick rinse after use
Keep an eye on the sealant, and replace it when it splits or goes black.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
How we handle shower tray repair in Tickenham
Stone resin, acrylic and ceramic trays can all be repaired, or resurface the whole tray if it’s worn. Nothing is taken out, so the enclosure and tiles are not disturbed. Common call-outs are for chips on the edges and damage around the waste, in ceramic, cast iron and enamelled steel.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Where
- Tickenham (BS21)
- Region
- North Somerset
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Trays sit under the screen and tiles, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Prices start from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why book with us
- Usually one visit, start to finish
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Repair technicians who travel to you, UK-wide
Read our pricing.
About Tickenham
Tickenham is about 1 mile north-west of Nailsea, in North Somerset. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover 86 places across North Somerset, from the larger towns to small villages.
Here we cover the BS21 postcode area. From Clevedon Road, Causeway and Ryves Vale or a nearby road, a technician can come to you. We also travel to Stone-edge Batch (1 mile east), Nailsea (1 mile south-east), Weston in Gordano (2 miles north), West Hill (2 miles east) and Clapton in Gordano (2 miles north-east). Within a short drive, we also cover Weston-super-Mare (9 miles south-west), Portishead (3 miles north), Clevedon (3 miles west), Milton (9 miles south-west), Yatton (4 miles south-west) and Worle (8 miles south-west).
Near you in Tickenham
In Tickenham, that means homes near The Star Inn, Nailsea School and Church of SS Quiricus & Julietta and the streets around them. For rail, the closest station is Nailsea & Backwell station, roughly 2.2 miles south-east. Well-known places in the area include North Somerset Community Hospital (2.6 miles west) and Oakham Treasures (3.4 miles north-east). Open spaces near Tickenham include Clapton Moor and Backwell Lake.
What affects the price in Tickenham
Repairs from £95. There is no charge for travel to Tickenham. The price depends on:
- The type of damage
- Whether we combine several jobs
- How many areas need work
- Access to the area
We charge the same wherever you are, so there’s no premium for Tickenham. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a few hours for a repair, longer for a full resurface. Before leaving, we tell you when it can be used and how to care for it.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- The repair is shaped, colour-matched and finished.
- We leave it to cure, normally until the following day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
How to get a price
Most customers in Tickenham get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Towns and villages near Tickenham
Other services in Tickenham
Landlords, agents and businesses in Tickenham
We regularly work with letting and managing agents. Send the address, pictures and access details.
We carry out planned and one-off repairs for housing associations and facilities teams in North Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Common questions in Tickenham
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you make an old tray look new?
Yes. A full resurface makes a tired tray look fresh.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Movement caused by a poor base, until the support is fixed
- Leaks from the waste or pipework (a plumber’s job)
- Trays cracked in several places
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron
- Ceramic
- Enamelled steel
- Stone resin
- Acrylic
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.
About our accreditations · Every repair comes with a one-year guarantee.
