Hampshire · England

Shower Tray Repair for Warborne homes

Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Warborne. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips on the edges
  • Staining and dullness across the tray
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Warborne homes

What affects the price in Warborne

Prices start from £95. There is no charge for travel to Warborne. The price comes down to:

  • The type of damage
  • The colour and finish to match
  • The size and number of damaged areas
  • The material

The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.

How we handle shower tray repair in Warborne

Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We regularly repair ceramic, stone resin and enamelled steel, and the jobs we see most are chipped corners or rims and chips caused during fitting.

A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.

Discoloured square shower tray restored with a new white finish
Location
Warborne (SO41)
Area hub
Hampshire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

What your shower tray is made of matters

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips can be filled and matched.

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Rinse away soap after showering
  • Keep harsh chemicals off the tray
  • Report any creaking or movement early
  • Replace failing sealant promptly

Keep an eye on the sealant, and replace it when it splits or goes black.

Every shower forces a little water into a crack, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.

Work for landlords and builders

For anyone letting property in or around Warborne, we’ll quote for several properties at once. Send pictures for each one and we will price them together.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Warborne questions

Do you reseal the tray as well?

Yes, if you’d like us to. It’s a good time to replace old sealant.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Are there extra charges for Warborne?

No. Our quotes include travel, and we charge the same wherever you are.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is a cracked shower tray safe to use?

We would stop using it until it’s repaired, because water may be getting underneath.

What a repair cannot fix

Before booking, it’s worth knowing the limits too:

  • A tray broken in more than one place
  • Leaking waste fittings
  • Damage below the tray that needs a builder

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Ceramic
  • Stone resin
  • Acrylic
  • Cast iron
  • Enamelled steel

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

Why repair rather than replace?

When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • A year’s guarantee on all work
  • Dust sheets down, tidy finish
  • Colours mixed by hand to suit your surface
  • Most jobs done in one visit

Take a look at our full price list.

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, or most of the day to resurface the whole tray. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. First we check the tray is solid and work out why any crack happened.
  2. The damaged area, or the entire tray, is cleaned and prepared.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. The repair is colour matched, or the entire tray gets a new finish.
  5. The tray is left to cure and can normally be used the day after.

Before we arrive

  • Let us know if it has been repaired before
  • Make sure the area is dry
  • Keep children and pets away from the room on the day

Ask for a price

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send pictures for a quote

Advice

Where we work around Warborne

Warborne is about 1 mile north of Lymington, in Hampshire. Wherever you are in the SO41 postcode area, we come to you. Warborne is one of 683 places in Hampshire we cover. You can also see our page for London, about 80 miles away.

Jobs in SO41 work the same way as everywhere else we cover. Nearby, we also work in Pilley (1 mile north-east), Boldre (1 mile north-west), Portmore (1 mile east), Pilley Bailey (1 mile north-east) and Bull Hill (1 mile north-east). Further out, we also cover Totton (10 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (8 miles north-east), New Milton (5 miles west) and Ringwood (12 miles north-west).

What’s near Warborne

Typical jobs here are in homes near William Gilpin Church of England Primary School, Walhampton Arms and Priestlands School and the streets around them. Also close by are Southlands School (less than half a mile south-west) and Saint Nicholas Chapel (0.5 miles north-east). The closest station to Warborne is Lymington Town station, roughly 1 mile south of the centre. A little further out are St Barbe Museum and Art Gallery (1.2 miles south) and Lymington New Forest Hospital (0.5 miles south-west). Open spaces near Warborne include Boldre Foreshore.

Map of Warborne © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.