North East Lincolnshire · England
Shower tray repair & resurfacing in Weelsby, North East Lincolnshire
Our repair technicians come to Weelsby for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A cracked shower tray
- A tray that creaks or moves underfoot
How we handle shower tray repair in Weelsby
The first thing we do is check the tray: a tray that moves needs its support sorted first, otherwise any crack returns. We will tell you if that is the case. Common call-outs are for edge chips from dropped bottles and staining and dullness across the tray, across acrylic, stone resin and cast iron.
Big or small, it’s backed by a one-year guarantee in Weelsby and across North East Lincolnshire.
- Area
- Weelsby (DN32, DN35, DN36)
- Area hub
- North East Lincolnshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Weelsby: your questions answered
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you reseal the tray as well?
We can. It’s a good time to replace old sealant.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How long does it take to cure?
Normally by the following day. We’ll tell you the exact time when we finish.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I get a price for shower tray repair in Weelsby?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Covering Weelsby
Weelsby is about 1 mile west of Cleethorpes, in North East Lincolnshire. Across the DN32 area, we carry out the work at your property. Weelsby is one of 34 places in North East Lincolnshire we cover. You can also see our page for Leeds, about 63 miles away.
All of DN32, DN35 and DN36 is within our area. That includes homes on Peaks Lane, Filey Road and Drew Avenue. Weelsby sits on or near the A1031, which makes travel easy. Neighbouring places we cover include Old Clee (1 mile east), New Clee (1 mile north), Cleethorpes (1 mile east), East Marsh (1 mile north) and Scartho (1 mile south-west). Larger places within reach include Immingham (7 miles north-west), Waltham (3 miles south-west), Healing (5 miles north-west), Laceby (4 miles west), Keelby (7 miles west) and South Killingholme (10 miles north-west).
Local landmarks in Weelsby
Locally, our jobs take us to homes close to Weelsby Woods, Old Clee Primary Academy and Church of the Holy Trinity and Holy Mary the Virgin. You will also find Oasis Academy Wintringham (0.6 miles south-west) and Beacon Academy (0.7 miles east). For rail, the closest station is Grimsby Town station, about 1.2 miles north-west. Further afield, we also cover the area around Diana (1.4 miles south-west) and Grimsby Castle (1.5 miles north-west).
Common problems we fix in Weelsby
Cracks often start at the waste, where the tray is cut and the fitting is tightened.
Look out for any of the following:
- Chipped corners or rims
- Scratches in the surface
- Chips or cracks by the plughole
- A dull, stained or worn surface
Before you book anyone
- Whether the price is fixed and includes VAT
- Who turns up on the day
- If travel is included in the price
- How long the guarantee is and what it covers
Materials and what they mean for the repair
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours for a repair, longer for a full resurface. We leave the room clean and ready to use once it has cured.
- We ensure the tray doesn’t flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- The repair is colour matched, or the whole tray gets a new finish.
- Once cured, typically by the next day, you can use the shower.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Point us to the nearest place to park
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Read more
Prices and what affects them
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether we combine several jobs
- How much damage there is
- The material and finish
- Unusual colours or finishes
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Getting a price from pictures
Two or three clear pictures are typically enough. It helps if you send:
- A close-up of the damage, in focus
- A wider photo showing the entire shower tray
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
To get a price, send two or three pictures through our quote form or ring us. We will say straight away if a repair is the right fix.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Places near Weelsby
More services for Weelsby
Aftercare tips
Aftercare is simple:
- Keep harsh chemicals off the tray
- Use the extractor fan
- Get a moving tray checked
- Rinse away soap after showering
Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaking waste fittings
- A tray that flexes because it was never properly supported
- Rotten or damaged flooring underneath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Stone resin
- Acrylic
- Cast iron
- Enamelled steel
- Ceramic
About our accreditations · Every repair comes with a one-year guarantee.
