North East Lincolnshire · England

Bath and surface repairs in DN32

Repairs and resurfacing across DN32, covering Grimsby, New Clee and East Marsh. Free, fixed quotes from your photos and a one-year guarantee.

Surface repairs across DN32

About bath repair in DN32

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. We regularly repair whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most often call us about damage done while the bathroom was being fitted and a kit repair that didn’t last.

Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes a few hours, depending on the damage, and we will keep you posted as we go.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

Prices in DN32

Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Colour mixed on the day to match
  • We come to you, anywhere in the UK
  • Free fixed quotes from pictures
  • A year’s guarantee on all work

Get a quote

The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Local landmarks in Grimsby

Locally, our jobs take us to homes close to Ormiston Maritime Academy, Weelsby Woods and Macaulay Primary Academy and the streets around them. Nearby too are St James' School (under half a mile south-east), The White Hart Public House (less than half a mile east) and St Hugh (under half a mile north). Grimsby has its own railway station: Grimsby Town station. Nearby you’ll also find Grimsby Castle (0.8 miles north-east) and Diana (1.2 miles south).

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Common problems we fix in DN32

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.

Keep an eye out for any of the following:

  • Chips along the edge of the bath
  • Chips under the taps
  • Hairline or through cracks in acrylic
  • Chips caused by builders

Keeping it looking good

It’s all simple stuff:

  • Rinse it down after each bath
  • Get a dripping tap fixed promptly
  • Put a towel in the bath if you are working above it
  • Ensure an acrylic bath is firm underfoot

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We carry out planned and one-off repairs for housing associations and facilities teams in North East Lincolnshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Materials and what they mean for the repair

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Questions from DN32

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

What do you need from me?

Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.