Flintshire · England

Shower Tray Repair in Wern-y-gaer

Shower tray repair in Wern-y-gaer without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • A tray that creaks or moves underfoot
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Wern-y-gaer

Shower tray repair at your home in Wern-y-gaer

Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. Nothing is taken out, so the enclosure and tiles are not disturbed. We regularly repair enamelled steel, ceramic and acrylic, and people most frequently call us about a crack across the base and scratches from cleaning or grit.

A one-year guarantee comes as standard.

Discoloured square shower tray restored with a new white finish
Where
Wern-y-gaer (CH7)
Area hub
Flintshire
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

About Wern-y-gaer

Wern-y-gaer is about 3 miles south-west of Flint, in Flintshire. Our repair technicians come to clients in Wern-y-gaer and nearby villages, so there’s no workshop to go to. Wern-y-gaer is one of 139 towns and villages in Flintshire we cover. Our nearest city page is Liverpool, about 17 miles away.

We cover every part of CH7. Nearby, we also work in Berth-ddu (1 mile north-east), Rhosesmor (1 mile south-east), Halkyn (1 mile north), Mynydd y Fflint (2 miles east) and Llan-eurgain (2 miles east). We also work in nearby towns such as Connah's Quay (5 miles east), Buckley (5 miles south-east), Bwcle (6 miles south-east), Flint (3 miles north-east), Saltney (11 miles east) and Mold (4 miles south-east).

What’s near Wern-y-gaer

In Wern-y-gaer, that means homes near Ysgol Rhos Helyg, The Red Lion Inn and St Paul's Church, among other places. The nearest railway station is Flint station, roughly 3.5 miles north-east of the centre. A little further out are Mold Community Hospital (3.4 miles south-east) and Moel-y-crio (0.7 miles north-west). Open spaces near Wern-y-gaer include Deeside Nature Reserve and Moel y Gaer.

Map of Wern-y-gaer © OpenStreetMap contributors

Why repair rather than replace?

Replacing a tray usually means refitting the screen, retiling and resealing. Repairing it avoids all of that and costs far less. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Colour-matched on site
  • Every repair guaranteed for a year
  • Everything repaired in place
  • Typically one visit, start to finish

See our full price list.

Questions from Wern-y-gaer

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

How much does shower tray repair cost in Wern-y-gaer?

Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Can you fix a cracked tray?

Usually, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

Do you come to Wern-y-gaer?

Yes. We work across the UK and travel to Wern-y-gaer. Send photos and we’ll quote, or call 0345 017 0787.

Is a cracked shower tray safe to use?

It’s best to stop using it until it’s checked, because water may be getting underneath.

What happens after I send pictures?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

What a repair can’t fix

In fairness, there are a few things a repair won’t fix:

  • Multiple cracks across the tray
  • A tray that flexes because it was never properly supported
  • Water damage to the floor beneath the tray

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Cast iron
  • Stone resin
  • Ceramic
  • Enamelled steel
  • Acrylic

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours, or most of a day for a full resurface. We tidy up before we leave and tell you when it’s ready to use.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Make sure the area is dry
  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Read more

How to care for the repair

Aftercare is simple:

  • Keep harsh chemicals off the tray
  • Check the seal every few months
  • Do not stand heavy bottles on the tray
  • Get a moving tray checked

Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.

Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

Landlords, agents and businesses in Wern-y-gaer

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

What we are called out for in Wern-y-gaer

Cracks often start at the waste, where the tray is cut and the fitting is tightened.

Common reasons people in Wern-y-gaer contact us are:

  • Cracks running from the waste
  • Chipped corners or rims
  • Movement when you stand on it
  • Staining and dullness across the tray

Questions to ask before you book

  • Aftercare advice
  • If travel is included in the price
  • How soon you can use it again
  • Is the price fixed, and does it include VAT?

10 questions to ask before you book

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Repairs by material

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.