North Lanarkshire · Scotland
Sink & basin repair in Ravenswood, North Lanarkshire
Damaged basin in Ravenswood? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Crazing in the glaze
- An antique basin with chips
Common problems we fix in Ravenswood
Glaze crazing comes with age and temperature changes, and harsh cleaners can make it worse.
If you can see any of these, send us a photo:
- Chips on the rim or front edge
- Damage to a basin in a vanity unit
- A crazed, tired basin
- A period basin that needs restoring
Questions to ask before booking
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- Whether there are any call-out or travel charges
- How the colour is matched
About our sink repair in Ravenswood
Whether it’s a chipped rim or a crack by the tap holes, basin damage is usually repaired in place. The taps stay connected and the basin stays on the wall. Typical jobs include damage from dropped bottles or hair tools and chips around the rim, on enamelled basins, vanity unit basins and Belfast and butler sinks.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Ravenswood (G67, G68)
- Region
- North Lanarkshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Ravenswood
More services for Ravenswood
About Ravenswood
Ravenswood is about 1 mile south of Cumbernauld, in North Lanarkshire. Clients in Ravenswood get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover 89 places in North Lanarkshire, from the larger towns to small villages. You can also see our page for Glasgow, about 12 miles away.
We cover every part of G67 and G68. That includes homes on Skye Road, Hill Road and Island Road and the roads around them. Nearby, we also work in Balloch (1 mile north-west), Condorrat (1 mile south-west), Craigmarloch (1 mile north-west), Smithstone (1 mile west) and Westfield (2 miles west). We also work in nearby towns such as Motherwell (10 miles south), Coatbridge (6 miles south), Airdrie (5 miles south), Wishaw (12 miles south), Bellshill (9 miles south) and Kilsyth (3 miles north-west).
Near you in Ravenswood
Around Ravenswood, we work in homes near St Mungo's Church, The Carrick Stone pub and Our Lady's High and the streets around them. Ravenswood’s nearest station is Greenfaulds station, roughly 0.7 miles south-east of the centre. Other landmarks nearby include Cumbernauld Castle (1.8 miles north-east) and Antonine Centre (0.6 miles north-east). Green spaces nearby include Bar Hill.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a couple of hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.
- We clean the basin and check the damage.
- Next we fill the damage and shape it to the basin’s profile.
- We colour-match the finish to the glaze.
- We polish the repair to blend it in.
- The basin can normally be used later that day or the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Ask for a price
If you’re in Ravenswood and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
What sink repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- Something in shot to show the size
- A picture taken from further back
- Natural light rather than flash
To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Common questions in Ravenswood
Will you remove the sink?
No. The repair is done in place, without disconnecting anything.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you come to Ravenswood?
Yes, we do. We send a technician to Ravenswood for every job, with no extra charge for travel.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How do I book?
Photos of the damage, a picture of the entire basin and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Is a chipped basin repairable?
Yes, it’s one of our most common jobs. The repair is shaped and polished to blend in.
Repair or replace in Ravenswood?
A basin is normally fixed into a unit or tiled around, so replacing one disturbs more than you’d expect. A repair avoids that. Our sink repair starts from £95. We charge the same wherever you are, so there’s no premium for Ravenswood. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Ravenswood customers choose us
- Colour mixed on the day to match
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
See our prices page.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Avoid strong bleach and descalers
- Don’t stand heavy bottles on the edge
- Don’t overtighten taps
- Don’t rest hot hair tools on the basin
Treat the basin gently for the first few days, then stick to mild cleaners. Keep heavy bottles and hot tools away from the rim.
Chips near the waste or taps can let water in, which can stain the repair area. Repairing it early keeps the job small.
Materials and what they mean for the repair
Period and antique
Older basins may have crazing, chips and makers’ marks. We repair carefully around original features and leave the character intact.
Composite and resin
Cast mineral and resin basins are common in vanity units. They repair well, and the colour is mixed to suit.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Widespread crazing
- Through cracks that let water out
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Antique & period basins
- Vanity unit basins
- Belfast and butler sinks
- Enamelled basins
- Ceramic & vitreous china basins
About our accreditations · Every repair comes with a one-year guarantee.
