South Lanarkshire · Scotland

Sink Repair for Rigside homes

Sink repair for Rigside, without a refit. Get a fixed quote from your photos, then book a visit.

  • Repairs from £95
  • Crazing in the glaze
  • An original basin worth saving
Surface Doctor technician refinishing the outside of a roll-top bath

Need sink repair in Rigside?

Prices and what affects them

Repairs from £95. There is no area surcharge for Rigside. What changes the price is:

  • Any earlier repairs that need removing first
  • How much damage there is
  • Unusual colours or finishes
  • Where the damage is and how we get to it

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the entire basin
  • A close-up of the damage, in focus
  • Any details about the material

A quote takes minutes to ask for: take one close-up and one wider shot of the basin, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Sink repair at your home in Rigside

We match the glaze as well as the colour. Repairs are polished to the same shine. If you’re dealing with a crazed, tired basin and knocks from hair straighteners, we can help, whatever the material.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Ceramic basin repaired, before and after
Where
Rigside (ML11)
Area hub
South Lanarkshire
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

When to call us in Rigside

Overtightened taps and wastes put stress on the ceramic, and cracks can start at the tap holes.

Typical reasons for a call-out include:

  • A chipped basin edge
  • Cracks around the tap holes or waste
  • Knocks from hair straighteners
  • A crazed, tired basin

What to look for in a quote

  • How long the guarantee is and what it covers
  • What aftercare is recommended
  • Who turns up on the day
  • How the room is protected while they work

Our hiring checklist

Aftercare tips

To keep it looking its best for years:

  • Use mild cleaners only
  • Clean with a soft cloth and mild detergent
  • Keep straighteners away from the basin
  • Keep heavy bottles off the rim

Don’t rest hot hair tools or heavy bottles on the rim, so it doesn’t get chipped again.

A crack near the taps can spread, so get it looked at early. If water is getting through, isolate the basin until it’s seen to.

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

For landlords and businesses

If you manage property in Rigside, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Landlords, letting agents and housing providers in Rigside use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

What we cannot put right

A repair is not right for every job, including:

  • A crack that leaks right through the basin
  • Glaze crazing across the entire basin, where resurfacing is better
  • Plumbing leaks

If in doubt, send photos and we’ll say what we think.

What we work on

  • Enamelled basins
  • Ceramic & vitreous china basins
  • Antique & period basins
  • Vanity unit basins
  • Belfast and butler sinks

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We clean the basin and check the damage.
  2. The chip or crack is filled and shaped to match the basin.
  3. The finish is matched to the glaze.
  4. We polish the repair to blend it in.
  5. The basin can generally be used later that day or the following day.

Before we arrive

  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area
  • Mention any parking restrictions or tricky access

How to get a price

Most customers in Rigside get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Read more

Materials and what they mean for the repair

Composite and resin

Cast mineral and resin basins are common in vanity units. They repair well, with colour mixed on site.

Period and antique

Older basins may have crazing, chips and makers’ marks. We repair carefully around original features and leave the character intact.

FAQs for Rigside

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

What do you need from me?

Photos of the damage, a picture of the entire basin and your postcode. Then we will agree a date.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Do you cover Rigside?

Yes, we do. We send a technician to Rigside for every job, with no extra charge for travel.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before and we will plan for it.

Rigside and the surrounding area

Rigside is about 10 miles south of Carluke, in South Lanarkshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 139 places in South Lanarkshire, from the larger towns to small villages. Our nearest city page is Glasgow, about 26 miles away.

We work across ML11. Whether you live on Douglasdale Street, Newtonhead Road and Broomfield Street or a nearby road, we can come to you. Nearby, we also work in Douglas Water (1 mile north), Carmichael (3 miles north-east), Devonburn (4 miles north-west), Douglas (4 miles south-west) and Coalburn (4 miles west). We also work in nearby towns such as Larkhall (12 miles north-west), Carluke (10 miles north), Lanark (5 miles north), Strathaven (12 miles north-west), Meikle Earnock (15 miles north-west) and Stonehouse (11 miles north-west).

Near you in Rigside

Nearby you will also find Castle Mains (1.9 miles south-west) and Douglas Heritage Museum (3.8 miles south-west).

Map of Rigside © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.