Leicestershire · England

Tile Repair in Bilstone

Our repair technicians come to Bilstone for chip, crack and drill-hole repairs to floor and wall tiles. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Damaged tile edges
  • Chips from dropped pans and tools
Surface Doctor technician refinishing the outside of a roll-top bath

Tile repair for Bilstone homes

Tile repair at your home in Bilstone

We repair the tile in place, so there is no need to hunt for a matching tile. If a tile moves, it may need relaying first, and we will say so. Typical jobs include discontinued tiles you can’t replace and drill holes from removed fittings, across ceramic tiles, porcelain tiles and natural stone & granite.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back. Avoid dropping heavy items on repaired floor tiles, and clean with a pH-neutral cleaner.

Area
Bilstone (CV13)
Region
Leicestershire
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: damaged granite tiles repaired in place

What affects the price in Bilstone

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • How much damage there is
  • Where the damage is and how we get to it
  • What kind of damage it is
  • The colour and finish to match

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Quotes from your photos

Phone pictures are fine, there is no need for anything special. Make sure they show:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • A photo taken from further back

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Loose or hollow tiles that need relaying
  • Cracks caused by a moving floor, until the floor is fixed
  • Whole walls of failing grout

Send us photos and we will tell you honestly.

Materials we repair

  • Ceramic tiles
  • Porcelain tiles
  • Natural stone & granite
  • Marble
  • Floor and wall tiles

Our work in Bilstone

Bilstone is about 7 miles south-west of Coalville, in Leicestershire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Bilstone is one of 287 towns and villages in Leicestershire where we work. Our jobs stretch from Bilstone to Birmingham (22 miles away).

Postcode districts we cover here: CV13. From Main Road, Mill Lane and Gibbet Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Congerstone (1 mile east), Shackerstone (1 mile north-east), Little Twycross (1 mile west), Wellsborough (2 miles south) and Bufton (2 miles east). Further out, we also cover Loughborough (14 miles north-east), Hinckley (8 miles south-east), Coalville (7 miles north-east), Ashby-de-la-Zouch (7 miles north), Shepshed (11 miles north-east) and Shelthorpe (14 miles north-east).

What’s near Bilstone

Our clients here include homes close to Church of St Mary the Virgin and Congerstone Primary School, among other places. A little further out are Ratcliffe Culey (4.3 miles south-west) and Shackerstone railway station (1.2 miles north-east). For a walk, there’s Ambion Hill.

Map of Bilstone © OpenStreetMap contributors

What we are called out for in Bilstone

Dropped pans and tools chip floor tiles, and wall tiles get drilled for fittings that are later removed. Movement underneath can also crack tiles.

Keep an eye out for these signs:

  • Drill holes from removed fittings
  • Cracked floor tiles
  • Damaged tile edges
  • Discontinued tiles you cannot replace

Comparing quotes

  • What preparation is included
  • Whether a trained technician does the job
  • How soon you can use it again
  • What happens if the damage is worse than the photos show

How to compare quotes

Your questions about tile repair in Bilstone

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Can I get a quote without a visit?

Usually, yes. Clear pictures let us give you a fixed price without visiting.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you fill holes left by old fittings?

Yes. Drill holes from old rails and shelves are a common job.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Why repair rather than replace?

Swapping out a damaged tile means breaking it out, finding a match and risking the tiles around it. A repair keeps the original tile. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Bilstone. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Straight answers about what a repair can do
  • We come to you, anywhere in the UK
  • Fixed prices from your pictures
  • Most jobs done in one visit

See our prices page.

How the visit works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and we leave the room as we found it.

  1. First the tile is cleaned and loose pieces removed.
  2. We fill the chip, crack or hole.
  3. We level and shape the repair to the tile surface.
  4. We recreate the colour and pattern by hand.
  5. The repair is sealed to suit the tile’s finish.

Before we arrive

  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the tiled area, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Advice

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Landlord and trade work in Bilstone

We work for landlords, letting agents and housing providers in Bilstone as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.