North Yorkshire · England

Tile repair in Bulmer, North Yorkshire

Problem with your tiled area in Bulmer? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Drill holes from removed fittings
  • Damaged tile edges
Surface Doctor technician refinishing the outside of a roll-top bath

Tile repair for Bulmer homes

Tile repair in Bulmer, done in place

We repair the tile in place, so you do not need to find a spare. If a tile moves, it may need relaying first, and we will say so. Whether it’s damaged tile edges and drill holes from removed fittings, we can usually put it right.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back. Avoid dropping heavy items on repaired floor tiles, and use a pH-neutral cleaner.

Before and after: damaged granite tiles repaired in place
Where
Bulmer (YO60)
Region
North Yorkshire
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Our work in Bulmer

Bulmer is about 11 miles north-east of York, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Our repair technicians cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Bulmer to Leeds (about 32 miles away).

Our visits in YO60 work the same way as everywhere else we cover. We also travel to Welburn-on-Derwent (2 miles east), Thornton-le-Clay (2 miles south-west), Welburn (2 miles east), Whitwell-on-the-Hill (2 miles south-east) and Crambeck (2 miles east). Larger places within reach include Malton (6 miles north-east), Pickering (12 miles north-east), Easingwold (10 miles west), Norton-on-Derwent (7 miles east), Kirkbymoorside (12 miles north) and Helmsley (11 miles north-west).

Landmarks near Bulmer

Our customers here include homes close to Church of St Martin and the streets around them. A little further out are Malton Hospital (5.9 miles north-east) and Henderskelfe Castle (2 miles north-east).

Map of Bulmer © OpenStreetMap contributors

When to call us in Bulmer

Dropped pans and tools chip floor tiles, while walls end up with drill holes from old fittings. Cracks can also come from movement in the floor below.

These are the problems we are asked about most:

  • Discontinued tiles you can’t replace
  • Chips from dropped pans and tools
  • Drill holes from removed fittings
  • Cracked floor tiles

What your quote should include

  • What happens if the damage is worse than the photos show
  • How long the guarantee is and what it covers
  • What protection goes down before work starts
  • Aftercare advice

Our hiring checklist

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Loose or hollow tiles that need relaying
  • Cracks caused by a moving floor, until the floor is fixed
  • Whole walls of failing grout

If in doubt, send pictures and we will say what we think.

Materials we work on in Bulmer

  • Natural stone & granite
  • Ceramic tiles
  • Marble
  • Floor and wall tiles
  • Porcelain tiles

Landlords, agents and businesses in Bulmer

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Repair or replace: which is better?

Swapping out a damaged tile involves breaking out the old tile, tracking down a matching tile and possibly cracking its neighbours. A repair leaves the tile where it is. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • Nothing taken out or refitted
  • Honest advice, even when it means no job
  • Colour-matched on site
  • Most jobs done in one visit

Read our prices page.

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What affects the price in Bulmer

Prices start from £95. You will know the full cost before you book. We take into account:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • How much damage there is
  • The type of damage

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.

How to get a fixed price

Two or three clear pictures are typically enough. It helps if you send:

  • A wider photo showing the whole tiled area
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Questions from Bulmer

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Bulmer.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

What areas do you cover?

We work UK-wide, and that includes Bulmer. Prices don’t change with location.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

How the visit works

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours. Before leaving, we tell you when it can be used and how to look after it.

  1. We clean the tile and remove loose fragments.
  2. The chip, crack or hole is filled.
  3. We level and shape the repair to the tile surface.
  4. The colour and pattern are recreated by hand.
  5. The repair is sealed to suit the tile’s finish.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area
  • Open a window if you can

Get a quote

To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Send pictures for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.